1.25mm Pitch FPC FFC Connector JUSHUO AF125-S05WCC-00 with Rated Current 1 Amp and Voltage 125 Volts
Manufacturer:
JUSHUO
Description:
FFC/FPC Connector 5 Position 1.25mm Pitch Top Contact Through Hole, Right Angle
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
5P
Pitch:
1.25mm
Current Rating:
1A
Voltage Rating (Max):
125V
Contact Type:
上接
Mounting Type:
弯插
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
AF125-S05WCC-00
Package:
Through Hole,Right Angle,P=1.25mm
Model Number:
AF125-S05WCC-00
Introduction
Product Overview
This specification covers the 1.25mm Pitch FPC/FFC Connectors LIF series, designed for applications requiring reliable connections with flexible flat cables. These connectors are suitable for FFC with a thickness of 0.3+/-0.03mm and a 1.25mm pitch. They offer robust electrical and mechanical performance, including specified contact resistance, insulation resistance, and dielectric strength. The connectors are built to withstand various environmental conditions, ensuring durability and consistent performance.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: 1.25mm Pitch FPC/FFC Connectors LIF series
- Housing Material: LCP ( or UL 94V-0)
- Contact Material: Phosphor Bronze C5191R-EH
- Contact Plating: Ni Base 40u" min, Surface Sn 80120u" or Au:0.8u"min
- Applicable FFC Specification: Thickness = 0.3+/-0.03mm, 1.25mm Pitch
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 125V [AC (rms) / DC] | |
| Rated Current (MAX) | 1.0A | |
| Ambient Temperature Range | -40+85 | |
| Storage Condition (after opening humidity prevention packing) | Temperature: -5+35, Humidity: 70% RH Max. | |
| Performance - Electrical | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength (rms) | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (rms) for 1 minute between adjacent terminals or ground. |
| Performance - Mechanical | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of contacts) |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of contacts) |
| Terminal / Housing Retention Force | 5.9 N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Performance - Environmental and Others | ||
| Repeated Insertion and Withdrawal (Contact Resistance) | 40 m MAX | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute. |
| Temperature Rise (at Rated Current) | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration (Contact Resistance) | 40 m MAX | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X, Y, Z axes, with DC 1mA applied. |
| Vibration (Discontinuity) | 1 ms MAX | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X, Y, Z axes, with DC 1mA applied. |
| Shock (Contact Resistance) | 40 m MAX | 490m/s {50G}, 3 strokes in each X, Y, Z axes, with DC 1mA applied. |
| Shock (Discontinuity) | 1 ms MAX | 490m/s {50G}, 3 strokes in each X, Y, Z axes, with DC 1mA applied. |
| Heat Resistance (Contact Resistance) | 40 m MAX | 852 for 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance (Contact Resistance) | 40 m MAX | -402 for 96 hours, then return to room temperature for 1-2 hours. |
| Humidity (Contact Resistance) | 40 m MAX | 402, 90-95% RH for 96 hours, then measure within 0.5 hours at room temperature. |
| Humidity (Insulation Resistance) | 50 M MIN | 402, 90-95% RH for 96 hours, then measure within 0.5 hours at room temperature. |
| Humidity (Dielectric Strength) | Must meet 4.1.3 | 402, 90-95% RH for 96 hours, then measure within 0.5 hours at room temperature. |
| Temperature Cycling (Contact Resistance) | 40 m MAX | 5 cycles of: -553 for 30 minutes, then room temp for 10-15 minutes, then 852 for 30 minutes, then room temp for 10-15 minutes. |
| Salt Spray (Contact Resistance) | 40 m MAX | 48 hours exposure to a 51% salt spray solution at 352. Followed by washing and drying. |
| SO2 Gas Resistance (Contact Resistance) | 40 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance (Contact Resistance) | 40 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability (Solder Wetting) | 95% or more coverage | Immersion in a 2455 tin bath for 20.5 sec, 0.2 mm from terminal tip. |
| Resistance to Soldering Heat (Wave Soldering) (Appearance) | No Damage, Deformation | Withstand wave soldering conditions twice: peak temp 2505 for 5~10s; temp 80-120 for 8~12s. |
Packaging, Transportation, and Storage
Packing: Unless otherwise specified, connectors are packaged in PE bags.
Transportation: Any vehicle can be used, provided it is protected from rain, direct sunlight, and mechanical damage.
Storage: Store in a warehouse with ambient temperature of -10+40, relative humidity not exceeding 80%, and no corrosive gases. For opened humidity prevention packing: Temperature: -5+35, Relative humidity: 70%.
Storage Duration: 6 months. Re-qualification test required if storage duration exceeds 6 months.
2409272303_JUSHUO-AF125-S05WCC-00_C5380643.pdf
Send RFQ
Stock:
MOQ:
