1.25mm Pitch FFC Connector JUSHUO AF125-S16WCC-00 Suitable for Vibration Shock Heat Cold Humidity
Manufacturer:
JUSHUO
Description:
-40℃~+85℃ Non-Latching 16P 1.25mm 1A 125V Right Angle Through Hole,Right Angle,P=1.25mm(Staggered Pins) FFC, FPC (Flat Flexible) Connector Assemblies RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
16P
Pitch:
1.25mm
Current Rating:
1A
Voltage Rating (Max):
125V
Mounting Type:
弯插
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
AF125-S16WCC-00
Package:
Through Hole,Right Angle,P=1.25mm(Staggered Pins)
Model Number:
AF125-S16WCC-00
Introduction
Product Overview
This specification covers the 1.25mm Pitch FPC/FFC Connectors, LIF series, designed for applications requiring a 1.25mm pitch with FFC thickness of 0.3+/-0.03mm. These connectors are rated for a maximum of 125V (AC rms/DC) and 1.0A, operating within an ambient temperature range of -40 to +85. They are suitable for various environmental conditions, including vibration, shock, heat, cold, and humidity, maintaining reliable electrical and mechanical performance.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Series: LIF
- Housing Material: LCP ( or UL 94V-0)
- Contact Material: Phosphor Bronze C5191R-EH
- Contact Plating: Ni Base 40u" min, Surface Sn 80120u" or Au:0.8u"min
- FFC Specification: Thickness = 0.3+/-0.03mm, Pitch = 1.25mm
- Origin: China (implied by company name and address)
Technical Specifications
| Category | Item | Test Condition | Requirement |
|---|---|---|---|
| Ratings | Rated Voltage (MAX) | 125V [AC (rms) / DC] | |
| Rated Current (MAX) | 1.0A | ||
| Ambient Temperature Range | -40+85 | ||
| Electrical Performance | Contact Resistance | Mate applicable FPC/FFC, dry circuit, 20mV MAX, 10mA | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC, 500V DC between adjacent terminals or ground | 500M MIN | |
| Dielectric Strength (rms) | Mate applicable FPC/FFC, 200V AC for 1 minute between adjacent terminals or ground | No Breakdown | |
| Mechanical Performance | Locking and Withdrawal Force | Insert and extract applicable 0.3mm thick FFC at 253mm/minute | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal / Housing Retention Force | Pull terminal outwards at 25 3mm/minute | 5.9 N MIN | |
| Environmental Performance | Repeated Insertion and Withdrawal | 20 cycles at <10 cycles/minute (no power) | Contact Resistance: 40 m MAX |
| Temperature Rise | Carrying rated current load (UL 498) | 30 MAX | |
| Vibration | DC 1mA, 1.5mm amplitude, 10-55-10Hz/min, 2 hours in X, Y, Z axes | Appearance: No Damage Contact Resistance: 40 m MAX Discontinuity: 1 ms.MAX. | |
| Shock | DC 1mA, 490m/s {50G}, 3 strokes in each X, Y, Z axes | Appearance: No Damage Discontinuity: 1 ms.MAX. | |
| Heat Resistance | 852 for 96 hours, then return to room temp | Appearance: No Damage Contact Resistance: 40 m MAX | |
| Cold Resistance | -402 for 96 hours, then return to room temp | Appearance: No Damage Contact Resistance: 40 m MAX | |
| Humidity | 402, 90-95% RH for 96 hours, measure within 0.5 hours after returning to room temp | Appearance: No Damage Contact Resistance: 40 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 50 M MIN | |
| Temperature Cycling | 5 cycles of: -553 (30 min) -> Room Temp (10-15 min) -> 852 (30 min) -> Room Temp (10-15 min) | Appearance: No Damage Contact Resistance: 40 m MAX | |
| Salt Spray | 48 hours exposure to 51% salt solution at 352, then wash and dry | Appearance: No Damage, No Corrosion Contact Resistance: 40 m MAX | |
| SO2 Gas Resistance | 24 hours exposure to 505ppm SO2 gas at 402 | Contact Resistance: 40 m MAX | |
| NH3 Gas Resistance | 40 minutes exposure to NH3 gas from 28% Ammonia solution | Appearance: No Damage Contact Resistance: 40 m MAX | |
| Solderability | Immersion in 2455 tin bath for 20.5 sec, 0.2 mm from terminal tip | Solder Wetting: 95% | |
| Resistance to Soldering Heat (Wave Soldering) | Wave soldering conditions twice (peak temp 2505 for 5-10s) | Appearance: No Damage, No Deformation |
2409272303_JUSHUO-AF125-S16WCC-00_C22470643.pdf
Send RFQ
Stock:
MOQ:
