1.25mm Pitch Flexible Flat Cable Connector Rated 125V 1.0A Current Industrial JUSHUO AF125-S12HCC-00
Manufacturer:
JUSHUO
Description:
FFC/FPC Connector 12 Position 1.25mm Pitch Single-side Contact/Vertical Through Hole
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
12P
Pitch:
1.25mm
Current Rating:
1A
Voltage Rating (Max):
125V
Contact Type:
单侧触点/垂直
Mounting Type:
直插
FFC, FCB Thickness:
0.3mm
Contact Material:
磷青铜
Mfr. Part #:
AF125-S12HCC-00
Package:
Through Hole,P=1.25mm
Model Number:
AF125-S12HCC-00
Introduction
Product Overview
This specification covers the 1.25mm Pitch FPC/FFC Connectors series, specifically the AF125-S**HCC-00 model. Designed for 1.25mm pitch flexible flat cable connections, these connectors are rated for a maximum voltage of 125V and a maximum current of 1.0A (AC rms/DC). They are suitable for an ambient temperature range of -40 to +85, making them versatile for various industrial applications.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: 1.25mm Pitch FPC/FFC Connectors
- Part Number: AF125-S**HCC-00
- Housing Material: LCP (Natural or Black, UL 94V-0)
- Contact Material: Phosphor Bronze C5191R-EH
- Contact Plating: Ni base 40" min, Sn surface 80120" or Au:0.8"min
Technical Specifications
| Item | Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 125V | |
| Rated Current (MAX) [AC(rms)/DC] | 1.0A | |
| Ambient temperature Range | -40 +85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (rms) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Terminal /Housing Retention Force | 3.92 N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Contact Resistance (after Repeated Insertion and Withdrawal) | 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise (under Rated Current) | 30 MAX | Carrying rated current load. (UL 498) |
| Appearance (after Temperature Rise Test) | No Damage | Carrying rated current load. (UL 498) |
| Contact Resistance (after Vibration Test) | 60 m MAX | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz in 1 minute, Duration: 2 hours in each X,Y,Z axes, under DC 1mA. |
| Discontinuity (during Vibration Test) | 1 ms.MAX. | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz in 1 minute, Duration: 2 hours in each X,Y,Z axes, under DC 1mA. |
| Appearance (after Vibration Test) | No Damage | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz in 1 minute, Duration: 2 hours in each X,Y,Z axes, under DC 1mA. |
| Discontinuity (after Shock Test) | 1 ms.MAX. | 490m/s{50G}, 3 strokes in each X,Y,Z axes, under DC 1mA. |
| Appearance (after Shock Test) | No Damage | 490m/s{50G}, 3 strokes in each X,Y,Z axes, under DC 1mA. |
| Contact Resistance (after Heat Resistance Test) | 60 m MAX | 852, 96 hours, then returned to room temperature for 1-2 hours. |
| Appearance (after Heat Resistance Test) | No Damage | 852, 96 hours, then returned to room temperature for 1-2 hours. |
| Contact Resistance (after Cold Resistance Test) | 60 m MAX | -402, 96 hours, then returned to room temperature for 1-2 hours. |
| Appearance (after Cold Resistance Test) | No Damage | -402, 96 hours, then returned to room temperature for 1-2 hours. |
| Insulation Resistance (after Humidity Test) | 20 M MIN | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours. |
| Appearance (after Humidity Test) | No Damage | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours. |
| Contact Resistance (after Temperature Cycling) | 60 m MAX | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at room temperature between cycles. |
| Appearance (after Temperature Cycling) | No Damage, No Corrosion | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at room temperature between cycles. |
| Contact Resistance (after Salt Spray Test) | 60 m MAX | 484 hours exposure to a salt spray from a 51% solution at 352. |
| Contact Resistance (after SO2 Gas Test) | 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| Appearance (after SO2 Gas Test) | No Damage | 24 hours exposure to 505ppm SO2 gas at 402. |
| Contact Resistance (after NH3 Gas Test) | 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder Wetting (Solderability) | 95% or more coverage | Soldering Time: 20.5 sec. Soldering Temperature: 2455, 0.2 mm from terminal tip. |
| Appearance (after Resistance to Soldering Heat) | No Damage, No Deformation | Soldering Time: 50.5 sec. Soldering Temperature: 2605, 0.2 mm from terminal tip. |
2409271733_JUSHUO-AF125-S12HCC-00_C5380636.pdf
Send RFQ
Stock:
MOQ:
