1.25mm Pitch Flexible Flat Cable Connector JUSHUO AF125-S30HCC-00 Rated 125V 1A Current Temperature
Manufacturer:
JUSHUO
Description:
-40℃~+85℃ Non-Latching 30P 1.25mm 1A 125V Through Hole Through Hole,P=1.25mm(Staggered Pins) FFC, FPC (Flat Flexible) Connector Assemblies RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
30P
Pitch:
1.25mm
Current Rating:
1A
Voltage Rating (Max):
125V
Mounting Type:
直插
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
AF125-S30HCC-00
Package:
Through Hole,P=1.25mm(Staggered Pins)
Model Number:
AF125-S30HCC-00
Introduction
Product Overview
This specification covers the 1.25mm Pitch FPC/FFC Connectors series, specifically the AF125-S**HCC-00 model. Designed for 1.25mm pitch flexible flat cable connections, these connectors are rated for a maximum voltage of 125V and a maximum current of 1.0A (AC RMS/DC). They operate reliably within an ambient temperature range of -40 to +85, making them suitable for a variety of industrial and electronic applications requiring secure and stable interconnections.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: 1.25mm Pitch FPC/FFC Connectors
- Part Number: AF125-S**HCC-00
- Housing Material: LCP (Natural or Black, UL 94V-0)
- Contact Material: Phosphor Bronze C5191R-EH
- Contact Plating: Ni Undercoat 40" min, Sn Surface 80120" or Au:0.8"min
Technical Specifications
| Category | Item | Test Condition | Requirement |
|---|---|---|---|
| Ratings | Rated Voltage (MAX) | 125V | |
| Rated Current (MAX) | [AC (rms) / DC] | 1.0A | |
| Ambient Temperature Range | -40 +85 | ||
| Electrical Performance | Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | 500 M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (rms) for 1 minute between adjacent terminals or ground. | No Breakdown | |
| Mechanical Performance | Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (0.3mm thick FFC) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal / Housing Retention Force | Pull the terminal at the speed rate of 253mm per minute. | 3.92 N MIN | |
| Environmental Performance and Others | Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute (no power). | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | Temperature Rise: 30 MAX | |
| Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X, Y, Z axes (DC 1mA energized). | Discontinuity: 1 ms.MAX. Appearance: No Damage | |
| Shock | 490m/s {50G}, 3 strokes in each X, Y, Z axes (DC 1mA energized). | Discontinuity: 1 ms.MAX. Appearance: No Damage | |
| Heat Resistance | 852, 96 hours (then return to room temp for 1-2 hours). | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Cold Resistance | -402, 96 hours (then return to room temp for 1-2 hours). | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Humidity | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours (then measure within 0.5 hours at room temp). | Insulation Resistance: 20 M MIN Appearance: No Damage | |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes b) 852 30 minutes (with 10-15 minutes at room temp between cycles) | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion | |
| Salt Spray | 484 hours exposure to a salt spray from a 51% solution at 352 (followed by washing and drying). | Contact Resistance: 60 m MAX | |
| SO2 Gas | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Solderability | Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2455 0.2 mm from terminal tip | Solder Wetting: 95% or more |
| Resistance to Soldering Heat | Resistance to Soldering Heat | Soldering Time: 50.5 sec. Soldering Temperature: 2605 0.2 mm from terminal tip | Appearance: No Damage, Deformation |
2409271733_JUSHUO-AF125-S30HCC-00_C22470641.pdf
Send RFQ
Stock:
MOQ:
