1.25mm Pitch FPC FFC Connectors with Phosphor Bronze Contacts and LCP Housing JUSHUO AF125-S28HCC-00
Manufacturer:
JUSHUO
Description:
FFC/FPC Connector 28 Position 1.25mm Pitch Single-side Contact/Vertical Through Hole
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
28P
Pitch:
1.25mm
Current Rating:
1A
Voltage Rating (Max):
125V
Contact Type:
单侧触点/垂直
Mounting Type:
直插
FFC, FCB Thickness:
0.3mm
Contact Material:
磷青铜
Mfr. Part #:
AF125-S28HCC-00
Package:
Through Hole,P=1.25mm
Model Number:
AF125-S28HCC-00
Introduction
Product Overview
This specification covers the 1.25mm Pitch FPC/FFC Connectors series, specifically the AF125-S**HCC-00 model. Designed for reliable connections, these connectors are suitable for applications requiring a 1.25mm pitch flexible flat cable interface. They offer a rated voltage of 125V and a rated current of 1.0A (AC/DC), with an operating temperature range of -40 to +85.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: 1.25mm Pitch FPC/FFC Connectors
- Part Number: AF125-S**HCC-00
- Housing Material: LCP (Natural or Black, UL 94V-0)
- Contact Material: Phosphor Bronze C5191R-EH
- Contact Plating: Ni Undercoat 40" min, Sn 80120" surface or Au:0.8"min
Technical Specifications
| Item | Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 125V | |
| Rated Current (MAX) | 1.0A [AC(rms)/DC] | |
| Ambient temperature Range | -40 +85 | |
| Performance - Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (rms) for 1minute between adjacent terminal or ground. |
| Performance - Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Terminal/Housing Retention Force | 3.92 N MIN | Pull the terminal at the speed rate of 253mm per minute. |
| Performance - Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration | Discontinuity: 1 ms MAX. Appearance: No Damage | DC 1mA under energized state; vibrate along X, Y, Z axes; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each axis. |
| Shock | Discontinuity: 1 ms MAX. Appearance: No Damage | DC 1mA under energized state; 490m/s {50G} shock in 6 mutually perpendicular directions; 3 strokes each. |
| Heat Resistance | Contact Resistance: 60 m MAX Appearance: No Damage | Mate applicable FPC/FFC; place in 852 air for 96 hours; then return to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance: 60 m MAX Appearance: No Damage | Mate applicable FPC/FFC; place in -402 air for 96 hours; then return to room temperature for 1-2 hours. |
| Humidity | Insulation Resistance: 20 M MIN Appearance: No Damage | Mate applicable FPC/FFC; place in 402, 90-95% RH air for 96 hours; measure within 0.5 hours after returning to room temperature. |
| Temperature Cycling | Contact Resistance: 60 m MAX Appearance: No Damage, No Corrosion | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at room temperature humidity between cycles. |
| Salt Spray | Contact Resistance: 60 m MAX | 484 hours exposure to a salt spray from a 51% solution at 352. After test, wash with room temperature water and dry at room temperature. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX Appearance: No Damage | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from a 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% or more coverage | Soldering Time: 20.5 sec. Soldering Temperature: 2455. 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation | Soldering Time: 50.5 sec. Soldering Temperature: 2605. 0.2 mm from terminal tip. |
2409271733_JUSHUO-AF125-S28HCC-00_C5380641.pdf
Send RFQ
Stock:
MOQ:
