1.25mm Pitch Flexible Flat Cable Connector Rated 125V 1.0A JUSHUO AF125-S18HCC-00 Electrical Connector
Manufacturer:
JUSHUO
Description:
-40℃~+85℃ Non-Latching 18P 1.25mm 1A 125V Through Hole Through Hole,P=1.25mm(Staggered Pins) FFC, FPC (Flat Flexible) Connector Assemblies RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
18P
Pitch:
1.25mm
Current Rating:
1A
Voltage Rating (Max):
125V
Mounting Type:
直插
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
AF125-S18HCC-00
Package:
Through Hole,P=1.25mm(Staggered Pins)
Model Number:
AF125-S18HCC-00
Introduction
Product Overview
This specification covers the 1.25mm Pitch FPC/FFC Connectors series, specifically the AF125-S**HCC-00 model. Designed for 1.25mm pitch flexible flat cable connections, these connectors are rated for a maximum voltage of 125V and a maximum current of 1.0A (AC rms/DC). They operate reliably within an ambient temperature range of -40 to +85. The series is suitable for applications requiring secure and stable connections for flexible flat cables.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: 1.25mm Pitch FPC/FFC Connectors
- Part Number: AF125-S**HCC-00
- Housing Material: LCP (Natural or Black, UL 94V-0)
- Contact Material: Phosphor Bronze C5191R-EH
- Contact Plating: Ni base 40" min, Sn surface 80120" or Au:0.8" min
Technical Specifications
| Item | Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 125V | |
| Rated Current (MAX) [AC (rms)/DC] | 1.0A | |
| Ambient temperature Range | -40 +85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (rms) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. (Assuming 0.3mm thick FFC) |
| Terminal/Housing Retention Force | 3.92 N MIN | Pull the terminal at the speed rate of 253mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration | Discontinuity: 1 ms.MAX. Appearance: No Damage | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. Under DC 1mA energization. |
| Shock | Discontinuity: 1 ms.MAX. Appearance: No Damage | 490m/s{50G}, 3 strokes in each X.Y.Z. axes. Under DC 1mA energization. |
| Heat Resistance | Contact Resistance: 60 m MAX Appearance: No Damage | 852, 96 hours. Mate applicable FPC/FFC. |
| Cold Resistance | Contact Resistance: 60 m MAX Appearance: No Damage | -402, 96 hours. Mate applicable FPC/FFC. |
| Humidity | Insulation Resistance: 20 M MIN Appearance: No Damage | Temperature: 402 Relative Humidity: 90-95% Duration: 96 Hours. Mate applicable FPC/FFC. |
| Temperature Cycling | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion | 5 cycles of: a) -553 30 minutes b) 852 30 minutes Mate applicable FPC/FFC. |
| Salt Spray | Contact Resistance: 60 m MAX | 484 hours exposure to a salt spray from the 51% solution at 352. Mate applicable FPC/FFC. |
| SO2 Gas | Contact Resistance: 60 m MAX Appearance: No Damage | 24 hours exposure to 505ppm. SO2 gas at 402. Mate applicable FPC/FFC. |
| NH3 Gas | Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. Mate applicable FPC/FFC. |
| Solderability | Solder Wetting: 95% or more coverage area. | Soldering Time: 20.5 sec. Soldering Temperature: 2455 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 50.5 sec. Soldering Temperature: 2605 0.2 mm from terminal tip. |
2409271733_JUSHUO-AF125-S18HCC-00_C22470640.pdf
Send RFQ
Stock:
MOQ:
