1.25 Millimeter Pitch FPC FFC Connector JUSHUO AF125-S05HCC-00 Rated Voltage 125 Volt Current 1 Amp
Manufacturer:
JUSHUO
Description:
FFC/FPC Connector 5 Position 1.25mm Pitch Single-side Contact/Vertical Through Hole
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
5P
Pitch:
1.25mm
Current Rating:
1A
Voltage Rating (Max):
125V
Contact Type:
单侧触点/垂直
Mounting Type:
直插
FFC, FCB Thickness:
0.3mm
Contact Material:
磷青铜
Mfr. Part #:
AF125-S05HCC-00
Package:
Through Hole,P=1.25mm
Model Number:
AF125-S05HCC-00
Introduction
Product Overview
This specification covers the 1.25mm Pitch FPC/FFC Connectors series, specifically the AF125-S**HCC-00 model from SHENZHEN JUSHUO ELECTRONIC CO.,LTD. These connectors are designed for 1.25mm pitch flexible flat cable connections and are rated for a maximum voltage of 125V and a maximum current of 1.0A (AC RMS/DC). They are suitable for an ambient temperature range of -40 to +85.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: FPC/FFC Connector
- Part Number: AF125-S**HCC-00
- Housing Material: LCP (Natural or Black UL 94V-0)
- Contact Material: Phosphor Bronze C5191R-EH
- Contact Plating: Ni Base 40u" min, Sn Surface 80120u" or Au:0.8u"min
Technical Specifications
| Item | Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 125V | |
| Rated Current (MAX) [AC(rms)/DC] | 1.0A | |
| Ambient temperature Range | -40 +85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (rms) for 1minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force (0.3mm FFC) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Terminal/Housing Retention Force | 3.92 N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise (Carrying rated current load) | 30 MAX | UL 498 |
| Vibration (DC 1mA) | Discontinuity: 1 ms.MAX. | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X.Y.Z. axes. |
| Shock (DC 1mA) | Discontinuity: 1 ms.MAX. | 490m/s{50G}, 3 strokes in each X.Y.Z. axes. |
| Heat Resistance (96 hours at 852) | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Cold Resistance (96 hours at -402) | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Humidity (96 hours at 402, 90-95% RH) | Insulation Resistance: 20 M MIN Appearance: No Damage | |
| Temperature Cycling (5 cycles) | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion | a) -553 30 minutes, b) 852 30 minutes, with transitions. |
| Salt Spray (48 hours at 352, 51% salt solution) | Contact Resistance: 60 m MAX | |
| SO2 Gas (24 hours at 402, 505ppm) | Contact Resistance: 60 m MAX Appearance: No Damage | |
| NH3 Gas (40 minutes exposure to NH3 gas from 28% Ammonia solution) | Contact Resistance: 60 m MAX | |
| Solderability | Solder Wetting: 95% or more | Soldering Time: 20.5 sec, Soldering Temperature: 2455, 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 50.5 sec, Soldering Temperature: 2605, 0.2 mm from terminal tip. |
2409271733_JUSHUO-AF125-S05HCC-00_C5380632.pdf
Send RFQ
Stock:
MOQ:
