Electrical Mechanical 1.25mm Pitch FPC FFC Connectors Featuring JUSHUO AF125-S06WCC-00 LIF Series Housing
Manufacturer:
JUSHUO
Description:
-40℃~+85℃ Non-Latching 6P 1.25mm 1A 125V Right Angle Through Hole,Right Angle,P=1.25mm(Staggered Pins) FFC, FPC (Flat Flexible) Connector Assemblies RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
6P
Pitch:
1.25mm
Current Rating:
1A
Voltage Rating (Max):
125V
Mounting Type:
弯插
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
AF125-S06WCC-00
Package:
Through Hole,Right Angle,P=1.25mm(Staggered Pins)
Model Number:
AF125-S06WCC-00
Introduction
Product Overview
This specification covers the 1.25mm Pitch FPC/FFC Connectors, LIF series, from SHENZHEN JUSHUO ELECTRONIC CO.,LTD. Designed for applications requiring a 1.25mm pitch and suitable for FFC with a thickness of 0.3+/-0.03mm, these connectors offer reliable electrical and mechanical performance.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: 1.25mm Pitch FPC/FFC Connectors
- Series: LIF
- Housing Material: LCP (Natural or Black, UL 94V-0)
- Contact Material: Phosphor Bronze C5191R-EH
- Contact Plating: Ni base 40u" min, Sn surface 80120u" or Au:0.8u"min
- Origin: Shenzhen, China
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 125V [AC (rms)/DC] | |
| Rated Current (MAX) | 1.0A | |
| Ambient Temperature Range | -40+85 | |
| Storage Condition (after opening humidity prevention packing) | Temperature: -5+35, Humidity: 70% RH Max. | |
| Performance - Electrical | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength (rms) | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (rms) for 1 minute between adjacent terminals or ground. |
| Performance - Mechanical | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of contacts) |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of contacts) |
| Terminal/Housing Retention Force | 5.9 N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Performance - Environmental and Others | ||
| Repeated Insertion and Withdrawal (Contact Resistance) | 40 m MAX | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute. |
| Temperature Rise (at Rated Current) | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration (Contact Resistance) | 40 m MAX | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X,Y,Z axes. (DC 1mA applied) |
| Vibration (Discontinuity) | 1 ms.MAX. | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X,Y,Z axes. (DC 1mA applied) |
| Shock (Contact Resistance) | 40 m MAX | 490m/s {50G}, 3 strokes in each X,Y,Z axes. (DC 1mA applied) |
| Shock (Discontinuity) | 1 ms.MAX. | 490m/s {50G}, 3 strokes in each X,Y,Z axes. (DC 1mA applied) |
| Heat Resistance (Contact Resistance) | 40 m MAX | 852, 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance (Contact Resistance) | 40 m MAX | -402, 96 hours, then return to room temperature for 1-2 hours. |
| Humidity Resistance (Contact Resistance) | 40 m MAX | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours, then measure within 0.5 hours at room temperature. |
| Humidity Resistance (Insulation Resistance) | 50 M MIN | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours, then measure within 0.5 hours at room temperature. |
| Humidity Resistance (Dielectric Strength) | Must meet 4.1.3 | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours, then measure within 0.5 hours at room temperature. |
| Temperature Cycling (Contact Resistance) | 40 m MAX | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes. |
| Salt Spray (Contact Resistance) | 40 m MAX | 48 hours exposure to a salt spray from the 51% solution at 352. Followed by washing with room temperature water and drying. |
| SO2 Gas Resistance (Contact Resistance) | 40 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance (Contact Resistance) | 40 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability (Solder Wetting) | 95% or more coverage | Immersion in a 2455 tin bath for 20.5 sec, 0.2 mm from terminal tip. |
| Resistance to Soldering Heat (Wave Soldering) | No Damage, Deformation | Parts shall withstand wave soldering conditions twice: peak temperature 250 5 for 5~10s; temperature 80-120 for 8~12s. Refer to temperature profile in [7]. |
| Packaging, Transportation, Storage | ||
| Packing | PE bag packaging (unless otherwise specified) | |
| Transportation | Any vehicle, moisture-proof, no mechanical damage | |
| Storage Temperature | -10+40 (Warehouse) | Relative humidity not greater than 80%, no corrosive gases. |
| Storage Duration | 6 months | Re-qualification test required after 6 months. |
2409272303_JUSHUO-AF125-S06WCC-00_C22470642.pdf
Send RFQ
Stock:
MOQ:
