LIF Series 1.25mm Pitch FPC FFC Connectors Rated 125V 1.0A Temperature Range JUSHUO AF125-S12WCC-00
Manufacturer:
JUSHUO
Description:
FFC/FPC Connector 12 Position 1.25mm Pitch Top Contact Through Hole, Right Angle
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
12P
Pitch:
1.25mm
Current Rating:
1A
Voltage Rating (Max):
125V
Contact Type:
上接
Mounting Type:
弯插
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
AF125-S12WCC-00
Package:
Through Hole,Right Angle,P=1.25mm
Model Number:
AF125-S12WCC-00
Introduction
Product Overview
This specification covers the 1.25mm Pitch FPC/FFC Connectors, LIF series, designed for applications requiring a 1.25mm pitch flexible flat cable with a thickness of 0.3+/-0.03mm. These connectors are rated for a maximum voltage of 125V [AC(rms)/DC] and a maximum current of 1.0A, operating within an ambient temperature range of -40 to +85. They are suitable for use with 0.3mm thick FFC and offer reliable electrical and mechanical performance.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: 1.25mm Pitch FPC/FFC Connectors
- Series: LIF
- Housing Material: LCP ( or UL 94V-0)
- Contact Material: Phosphor Bronze C5191R-EH
- Contact Plating: Ni Base 40u min, Surface Sn 80120u or Au:0.8umin
- Origin: Shenzhen, China
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 125V [AC(rms)/DC] | |
| Rated Current (MAX) | 1.0A | |
| Ambient Temperature Range | -40+85 | |
| Storage Condition (after opening humidity prevention packing) | Temperature: -5+35, Humidity: 70% RH Max. | |
| Performance - Electrical | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength (rms) | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (rms) for 1 minute between adjacent terminal or ground. |
| Performance - Mechanical | ||
| Locking Force | 1.96*n (N) MAX | Insert applicable FFC at the speed rate of 253mm/minute. 'n' is the number of contacts. |
| Withdrawal Force | 0.49*n (N) MIN | Extract applicable FFC at the speed rate of 253mm/minute. 'n' is the number of contacts. |
| Terminal/Housing Retention Force | 5.9 N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Performance - Environmental and Others | ||
| Repeated Insertion and Withdrawal (Contact Resistance) | 40 m MAX | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration (Contact Resistance) | 40 m MAX | DC 1mA energized; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X, Y, Z axes. |
| Vibration (Discontinuity) | 1 ms.MAX. | DC 1mA energized; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X, Y, Z axes. |
| Shock (Contact Resistance) | 40 m MAX | DC 1mA energized; 490m/s{50G}, 3 strokes in each X, Y, Z axes. |
| Shock (Discontinuity) | 1 ms.MAX. | DC 1mA energized; 490m/s{50G}, 3 strokes in each X, Y, Z axes. |
| Heat Resistance (Contact Resistance) | 40 m MAX | Mate applicable FPC/FFC; Placed in 852 air for 96 hours, then returned to room temperature for 1-2 hours. |
| Cold Resistance (Contact Resistance) | 40 m MAX | Mate applicable FPC/FFC; Placed in -402 air for 96 hours, then returned to room temperature for 1-2 hours. |
| Humidity (Contact Resistance) | 40 m MAX | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours; Measured within 0.5 hours after returning to room temperature. |
| Humidity (Insulation Resistance) | 50 M MIN | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours; Measured within 0.5 hours after returning to room temperature. |
| Humidity (Dielectric Strength) | Must meet 4.1.3 | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours; Measured within 0.5 hours after returning to room temperature. |
| Temperature Cycling (Contact Resistance) | 40 m MAX | 5 cycles of: a) -553 for 30 minutes, b) 852 for 30 minutes, with 10-15 minutes at room temperature between cycles. |
| Salt Spray (Appearance) | No Damage, Corrosion | 48 hours exposure to a salt spray from a 51% solution at 352. Followed by washing with room temperature water and drying. |
| Salt Spray (Contact Resistance) | 40 m MAX | 48 hours exposure to a salt spray from a 51% solution at 352. Followed by washing with room temperature water and drying. |
| SO2 Gas (Contact Resistance) | 40 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas (Appearance) | No Damage | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| NH3 Gas (Contact Resistance) | 40 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability (Solder Wetting) | 95% or more wetting area | Terminal tip immersed in a 2455 tin bath for 20.5 sec, 0.2 mm from terminal tip. |
| Resistance to Soldering Heat (wave soldering) (Appearance) | No Damage, Deformation | Parts shall withstand wave soldering conditions twice: peak temperature 250 5 for 5~10s; temperature 80-120 for 8~12s. See temperature profile in [7]. |
| Packaging, Transportation, Storage | ||
| Packing | PE bag packaging (unless otherwise specified) | |
| Transportation | Any vehicle, moisture-proof and no mechanical damage | |
| Storage Temperature | -10+40 (Warehouse) / -5+35 (Specified) | Relative humidity not greater than 80%. No corrosive gases. |
| Storage Duration | 6 months (Re-qualification test required after 6 months) | |
2409272303_JUSHUO-AF125-S12WCC-00_C5380644.pdf
Send RFQ
Stock:
MOQ:
