electrical connector strip kinghelm KH-HX2.54-06FGW suitable for AWG24 to 30 wire sizes and 16mm PC board thickness
Manufacturer:
kinghelm
Description:
Connector Header 6 position 2.54mm Pitch Right Angle
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
13.3mm
Flame Retardant Rating:
UL94V-0
Pins Structure:
1x6P
Contact Plating:
锡
Contact Material:
黄铜;PA66
Pitch:
2.54mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
6
Number Of Rows:
1
Z-Height Of The Board:
5.8mm
Operating Temperature:
-25℃~+85℃
Mounting Type:
弯插
Mfr. Part #:
KH-HX2.54-06FGW
Package:
Through Hole,Right Angle,P=2.54mm
Model Number:
KH-HX2.54-06FGW
Introduction
Product Overview
The 2510 series connector strip is designed for reliable electrical connections. It features robust materials and construction to ensure performance under various environmental conditions. This connector strip is suitable for applications requiring specific wire sizes and PC board thicknesses, offering dependable electrical and mechanical performance.
Product Attributes
- Brand: Zhehongyi (implied by contact information)
- Origin: China
- Model/Series: 2510 series connector strip
- Certifications: UL94V-0 (for Housing and Wafer)
- RoHS: Compliant (implied by section header)
Technical Specifications
| Category | Item | Test Mode | Requirement |
|---|---|---|---|
| Use Condition | Ambient temperature Range | -25C to +85C | |
| Applicable Wire Sizes | AWG#24 to #30 | ||
| Applicable PC board thickness | 1.6mm | ||
| Appearance and Dimension | Appearance | Product surface without defect, dirt, crack, and mechanical damage. Contact without rust, plating not oxidized and not peeled. | |
| Dimension | According to drawings | ||
| Exchangeable | Exchangeable with same specification products. | ||
| Material | Terminal Material | Phosphor bronze | |
| Terminal Finish | Tin Plating: 3~5 m | ||
| Housing Material | Nylon66 UL94V-0 | ||
| Wafer Material | Brass | ||
| Wafer Finish | Tin Plating: 2.5~5 m | ||
| Electrical Performance | Current Rated | 4A AC/DC | |
| Voltage Rated | 250V AC/DC | ||
| Contact Resistance | Mate connector test | Initial value: Less than 20m | |
| Withstand Voltage | Apply 1000V AC (rms) for 1 minute | No breakdown or flashover. Leakage current shall not exceed 0.5mA. | |
| Insulation Resistance | Apply 500V DC (rms) for 1 minute between adjacent contacts | More than 1000 M | |
| Mechanical Performance | Terminal crimping wire strength | AWG#24 wire | More than 30N |
| AWG#26 wire | More than 20N | ||
| AWG#28 wire | More than 13N | ||
| AWG#30 wire | More than 8N | ||
| Fixed terminals and hole seat | Pull out force | More than 15N per contact | |
| Single contact insertion force | Inserting force test | Less than 6N | |
| Single contact withdrawal force | Pull-out test | More than 0.6N | |
| Pin Retention force | Pull-out force on pin end | More than 15N per contact | |
| Durability | Up to 30 cycles | Contact Resistance: 30 m | |
| Vibration | Test according to specifications | Contact Resistance: 30 m. Current Discontinuity: 1 micro second Max. Appearance: No damage. | |
| Endurance Characteristics | Thermal Aging | 852C for 96 hours | Contact Resistance: 30 m. Appearance: No damage. |
| Temperature Rise | At maximum rated current | 30C Max | |
| Humidity | 402C, 90-95%RH for 96 hours | Contact Resistance: 30m. Insulation Resistance: 500M. No breakdown or flashover. Appearance: No damage. | |
| Temperature cycling | 5 cycles (-55C to 85C) | Same as paragraph 8.3 (Contact Resistance, Insulation Resistance, Withstand Voltage, Appearance) | |
| Salt spray | 353C, 51% solution, 8 hours (after plating) / 48 hours (before plating) | Contact Resistance: 30m. Appearance: No damage. | |
| Solder ability | 2455C, 30.5S immersion | Area of Soldering: 90% | |
| Resistance to soldering heat | DIP type: 3055C, 30.5S. Wave soldering: 2305C, 50.5S | Appearance: No damage. | |
| Packaging, Transportation, Storage | Packaging | Terminal: Reel packaging. Housing: Plastic bags. Wafer: Bags packed. Includes certificate. Exterior: Carton. | Product name, specifications, quantity, production date indicated. |
| Transportation | Any vehicle, moisture-proof, no mechanical damage. | Temperature: -20C to +50C. | |
| Storage | Ambient temperature: -10C to +40C, RH 80%. Store in a warehouse without acidic, alkaline air or corrosive gas. | Re-qualification test required if storing duration exceeds 6 months. |
2409302201_kinghelm-KH-HX2-54-06FGW_C3250097.pdf
Send RFQ
Stock:
MOQ:
