TE Connectivity 2366999 2 Nano MAG MATE Terminal Suitable for Wire Size 40 through 30 AWG Copper Wire
Manufacturer:
TE Connectivity
Description:
Magnetic Wire Connectors RoHS
Category:
Barrel, Bullet Connectors/Magnetic Wire Connectors
Specifications
Mfr. Part #:
2366999-2
Model Number:
2366999-2
Introduction
Product Overview
The TE Connectivity Nano MAG-MATE Terminal is an insulation-piercing terminal designed for application with Micro IDC Terminals. It is engineered to accept a wire size range of 40 through 30 AWG solid round copper magnet wire with single insulation. These terminals are suitable for applications requiring reliable wire termination in compact designs, with performance dependent on proper cavity design and wire placement according to TE guidelines.
Product Attributes
- Brand: TE Connectivity
- Product Line: Nano MAG-MATE Terminal
- Trademark: TE Connectivity, TE connectivity (logo), TE (logo)
Technical Specifications
| Feature | Specification | Details |
|---|---|---|
| Wire Size Range | 40 through 30 AWG | Solid round copper magnet wire with single insulation |
| Application | Micro IDC Terminals | Insulation piercing |
| Cavity Design Requirement | TE Guidelines | Dependent on insertion into a cavity designed to TE guidelines. Recommended material: 30% glass filled nylon and PBT or TE Engineering approved equivalent. |
| Wire Placement | Bottom of cavity slot | Magnet wire must be flat on the bottom of the cavity slot prior to terminal insertion. |
| Tie-off Post Lacing | Minimum three times | Free end of magnet wire shall be laced and wrapped a minimum of three times around the tie-off post. |
| Terminal Insertion | As shown in Figure 4 | Magnet wire must be placed between cavity and terminal serrations after inserting terminals. |
| Terminal Cutoff Tab & Burr | Within limits specified in Figure 5 | Scratch mark in terminal insertion process is acceptable. |
| Storage Temperature | 15-35C | Low ambient humidity (25-75% relative humidity) as per DIN IEC68. |
| Solderable Product Shelf Life | 6 months | Solderable within 6 months after delivery. |
| Product Specification | 108-140191 | Provides product performance and test results. |
| Instructional Material | 408-series, 409-series | For assembly, tooling setup, and machine operation procedures. |
| Cavity Design Drawings | 411-series | Provide cavity dimensions and interface dimensions. |
| Representative Product Base Part Number | 2366999 | |
| Representative Product Code | 1043 |
2410311147_TE-Connectivity-2366999-2_C22259319.pdf
Related Products
magnet wire terminals TE Connectivity 63877-1 MAG-MATE insulation displacement crimp connectors for motor windings
Magnetic Wire Connectors RoHS
magnet wire termination solutions TE Connectivity 63806-1 MAG MATE IDC terminals for motor coil and transformer windings
Magnetic Wire Connectors RoHS
magnet wire termination system TE Connectivity 63309-1 for insulation displacement crimp connections
Magnetic Wire Connectors RoHS
| Image | Part # | Description | |
|---|---|---|---|
|
|
magnet wire terminals TE Connectivity 63877-1 MAG-MATE insulation displacement crimp connectors for motor windings |
Magnetic Wire Connectors RoHS
|
|
|
|
magnet wire termination solutions TE Connectivity 63806-1 MAG MATE IDC terminals for motor coil and transformer windings |
Magnetic Wire Connectors RoHS
|
|
|
|
magnet wire termination system TE Connectivity 63309-1 for insulation displacement crimp connections |
Magnetic Wire Connectors RoHS
|
Send RFQ
Stock:
MOQ:
