Power and Control Base TE Connectivity 2361116-2 LUMAWISE Endurance N with Preinstalled Dimming Contacts
Manufacturer:
TE Connectivity
Description:
Solid State Lighting Connector Accessories RoHS
Category:
Solid State Lighting Connector Accessories/Solid State Lighting Connector Accessories
Specifications
Mfr. Part #:
2361116-2
Model Number:
2361116-2
Introduction
Product Overview
The LUMAWISE Endurance N Control Base and Cover is designed for roadway and area lighting applications, utilizing the ANSI C136.41 interface. It features pre-installed contacts within the Dimming Light Controller Base, a molded gasket seal for environmental protection, and is available with 2 or 4 dimming signal contacts. The customer is responsible for providing and installing the light controller electronics. This product is suitable for applications requiring reliable control and power connections in outdoor lighting environments.
Product Attributes
- Brand: TE Connectivity (TE)
- Product Line: LUMAWISE Endurance N
- Certifications: Component Recognized by Underwriters Laboratories, Inc. (File E66375, Volume 4), investigated to CSA International by UL, evaluated to IEC-61984 (CB report certificate US-30977-UL).
- Material: Base housing and cover: UL 94V-0, UV f1 rated thermoplastic. Line voltage contacts: Brass plated overall with tin. Dimming signal contacts: Copper alloy with gold plating in contact interface area, tin plated in solder tail area with nickel under-plate.
- Operating Temperature: -40 to 85C [-40 to 185F]
- Storage: Recommended to remain in shipping containers until use, first-in, first-out basis. Avoid storage near specified chemicals (Alkalies, Ammonia, Citrates, Phosphates, Sulfur Compounds, Amines, Carbonates, Nitrites, Tartrates) to prevent stress corrosion cracking.
- Repairability: Contacts and control base are not repairable. Assembled base and cover are not repairable.
Technical Specifications
| Feature | Specification |
| Interface Standard | ANSI C136.41 |
| Dimming Signal Contacts | 2 or 4 |
| Contact Material (Line Voltage) | Brass plated with tin |
| Contact Material (Dimming Signal) | Copper alloy (gold plated contact interface, tin plated solder tail, nickel under-plate) |
| Housing Material | UL 94V-0, UV f1 rated thermoplastic |
| Temperature Range | -40 to 85C [-40 to 185F] |
| PC Board Standoffs | 4 |
| Gasket Seal | Molded to base for sealing between base and cover, and base and receptacle |
| Soldering Requirements | Thru-hole solder tails. Adhere to IPC-A-610 and IPC J-STD-001 workmanship standards. |
| Cover Assembly | Key and keyway alignment, 6 latches. Recommended use of assembly fixture and press. |
| Vented Base Assembly | Ensure no external or internal components touch vented areas; maintain minimum 1mm gap. |
| Mounting Orientation | Receptacle on top of fixture; orient North indicator North if possible. |
| Contact Connections | Refer to Figure 5 for alignment and mating. Contact color labels per ANSI C136.41-2013. |
| Mating/Un-mating | Align blades, push downward, twist clockwise to lock. Twist counter-clockwise and pull to un-mate. Neutral blade is larger for polarization. |
2412061703_TE-Connectivity-2361116-2_C17532869.pdf
Send RFQ
Stock:
MOQ:
