Power jack GANGYUAN DC-470-2.5GP offering consistent electrical characteristics and durability
Manufacturer:
GANGYUAN
Description:
Power Barrel Connector Jack 2.5mm ID 6.3mm OD Through Hole, Right Angle
Category:
Power Connectors/Power Connectors
Specifications
Mounting Type:
弯插
Connector Type:
DC电源插座
Rated Current:
500mA
Working Temperature:
-40℃~+55℃
Inside Contact Diameter:
2.5mm
Rated Voltage:
30V
Outside Contact Diameter:
6.3mm
Mfr. Part #:
DC-470-2.5GP
Package:
Through Hole
Model Number:
DC-470-2.5GP
Introduction
Product Overview
The DC-470 2.5/351 DC Power Jack is designed for reliable power connectivity. It operates within a wide temperature range of -40~55C and is built to withstand mechanical stress, electrical demands, and environmental conditions, making it suitable for various electronic applications.
Product Attributes
- Brand: Shenzhen Gangyuan Microkey Technology Co.,ltd
- Origin: Shenzhen
- Model: DC-470 2.5/351
- Color: Black (for cover and base)
Technical Specifications
| Item | Test Conditions | Performance |
| Mechanical Performance | ||
| Connection Force | After connecting and disconnecting 3 times using standard plug gauge. | 3~20N |
| Disconnection Force | After connecting and disconnecting 3 times using standard plug gauge. | 3~20N |
| Terminal Strength | 0.1N/m (1kgf/cm) static load applied to the tip of the terminal for 1 min in any direction. No damage, cracks, looseness, or play. Mechanical and electrical characteristics shall be satisfied. | Satisfied |
| Electrical Performance | ||
| Contact Resistance | Measured at small current ( 100mA) at 1000Hz. | 0.03 |
| Insulation Resistance | Apply 500V DC for 1 min between body and conductor, between conductors not to be in contact, and between conductors not to be in contact when plug is inserted. | 100M |
| Dielectric Strength | Apply AC 500V rms (50~60Hz) for 1 min with trip current of 0.5mA between body and conductor, between conductors not to be in contact, and between conductors not to be in contact when plug is inserted. | Without damage, arcing, or breakdown. |
| Durability | ||
| Solderability Test | Top of terminals dipped 1mm in solder bath at 2405 for 30.5 seconds. | Solder wetting time 3 sec; Soldering area > 75%. |
| Resistance to Soldering Heat Test (Reflow) | Preheat: Surface temperature reaches 180 for 120s. Peak temperature: 2605 within 20 seconds. | No deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 3305, application time 30.5 seconds. No excessive pressure on terminal. | No deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| Humidity Test | Stored at 402 and 90%-96% humidity for 96 hours, then maintained at standard atmospheric conditions for 1 hour. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| Heat Test | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 hour. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| Cold Test | Stored at -253 for 96 hours, then subjected to controlled recovery for 1 hour. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| Life Test (No Load) | 5,000 cycles of connection and disconnection with mating plugs at a speed of 10 to 25 cycles/min. | Mechanical and electrical characteristics shall be satisfied. |
| Life Test (Load) | 1,000 cycles of connection and disconnection at rating condition (non-inductive load) with a speed of 10 to 20 cycles/min. | Contact resistance 0.1; Disconnection force 3 to 20N; Other mechanical and electrical characteristics shall be satisfied. |
| Temperature Cycling Test | 5 cycles of specified conditions, then returned to room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
| Cold & Heat Shock Test | 5 cycles of specified conditions, then returned to room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
| Material | ||
| Cover | PA66 (Black) | - |
| Base | PA66 (Black) | - |
| Pin | H59-1 Brass 2.0 | - |
| Fixed Contact | Iron Sheet t=0.3 | - |
| Moving Contact | High-precision phosphor copper t=0.25 | - |
| Pin Terminal | Iron Sheet t=0.35 | - |
2410121450_GANGYUAN-DC-470-2-5GP_C194408.pdf
Related Products
power input component GANGYUAN DC-470-1-2.1/351 DC Power Jack tested for connection force and terminal strength under load
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
black GANGYUAN DC-470-2.0GP DC power jack with brass plug pin and phosphor copper contact materials
Power Barrel Connector Jack 2mm ID 6.3mm OD Through Hole, Right Angle
Standard black color GANGYUAN DC-470-2.1GP DC power jack engineered for connection and long service life
Power Barrel Connector Jack 2.1mm ID 6.3mm OD Through Hole, Right Angle
| Image | Part # | Description | |
|---|---|---|---|
|
|
power input component GANGYUAN DC-470-1-2.1/351 DC Power Jack tested for connection force and terminal strength under load |
Power Barrel Connector Jack 2mm ID 6.4mm OD Through Hole, Right Angle
|
|
|
|
black GANGYUAN DC-470-2.0GP DC power jack with brass plug pin and phosphor copper contact materials |
Power Barrel Connector Jack 2mm ID 6.3mm OD Through Hole, Right Angle
|
|
|
|
Standard black color GANGYUAN DC-470-2.1GP DC power jack engineered for connection and long service life |
Power Barrel Connector Jack 2.1mm ID 6.3mm OD Through Hole, Right Angle
|
Send RFQ
Stock:
MOQ:
