Electrical DC socket hanxia HX DC002-1.3 QT with 30V DC rated voltage 1.0A current and 500V AC withstand voltage
Manufacturer:
hanxia
Description:
Power Barrel Connector Jack 1.3mm ID 4.3mm OD Through Hole, Right Angle
Category:
Audio Connectors/Power Connectors
Specifications
Mounting Type:
弯插
Connector Type:
DC电源插座
Rated Current:
1A
Working Temperature:
-25℃~+70℃
Rated Voltage:
30V
Inside Contact Diameter:
1.3mm
Outside Contact Diameter:
4.3mm
Mfr. Part #:
HX DC002-1.3 QT
Package:
Through Hole
Model Number:
HX DC002-1.3 QT
Introduction
Product Overview
The HX DC002-1.3 QT is a DC socket manufactured by Shenzhen Hanxia Electronic Co., Ltd. It is designed for general electrical applications with specific parameters for voltage, current, and resistance. The product is built to withstand a certain number of mating cycles and operates within a defined temperature range.
Product Attributes
- Brand: Hanxia
- Origin: Shenzhen, China
- Model: HX DC002-1.3 QT
Technical Specifications
| Item | Specification | Test Condition |
| Electrical Characteristics | ||
| Rated Voltage | 30V DC | |
| Rated Current | 1.0A | |
| Contact Resistance | 30m MAX | Measured at 1KHZ small current |
| Insulation Resistance | 100M Min | Measured at DC500V potential for 1 minute (across terminals and frame) |
| Withstand Voltage | 500V AC (50Hz or 60Hz) | Applied across terminals and frame for 1 minute. No breakdown. |
| Mechanical Performance | ||
| Mate Force | 3-20N | Measured with force gauge between plug and spring piece |
| Unmate Force | 3-20N | Measured with force gauge between plug and spring piece |
| Durability | 5000 Cycles | Unloading, 20-30 cycles/minute. Contact resistance 40m max, Drive force change 30% of initial value. |
| Terminal Strength | 500gf static force applied for 1 minute in one direction on terminal top. No mechanical or electrical damage. | |
| Environmental Conditions | ||
| Operating Temperature Range | -25~+70 | |
| Standard Test Condition | Temperature 5~35, Humidity 45~85% | |
| Environmental Use | Temperature -25~70, Humidity 45~85% | |
| Soldering Test | Terminal top dipped 2mm in solder bath at 2305 for 3 sec. | |
| Heat Test | 48 hours at 802, then 30 min in normal condition. Contact resistance 50m max, Insulation resistance 100M min, no mechanical/electrical damage. | |
| Humidity Test | 48 hours at 402 and 90-95% RH, then 30 min in normal condition. | |
| Cold Test | 48 hours at -302, then 30 min in normal condition. |
2411211943_hanxia-HX-DC002-1-3-QT_C41375958.pdf
Send RFQ
Stock:
MOQ:
