Mechanical and electrical DC power jack hanxia HX DC002F-1.3 BT designed for electronic applications
Manufacturer:
hanxia
Description:
Power Barrel Connector Jack 1.3mm ID 4.2mm OD Through Hole
Category:
Audio Connectors/Power Connectors
Specifications
Mounting Type:
直插
Connector Type:
DC电源插座
Rated Current:
1A
Working Temperature:
-25℃~+70℃
Rated Voltage:
12V
Inside Contact Diameter:
1.3mm
Outside Contact Diameter:
4.2mm
Mfr. Part #:
HX DC002F-1.3 BT
Package:
Through Hole
Model Number:
HX DC002F-1.3 BT
Introduction
Product Overview
The HX DC002F-1.3 BT is a DC power jack from Shenzhen Hanxia Electronic Co., Ltd. It is designed for reliable electrical connections and mechanical durability, suitable for various electronic applications.
Product Attributes
- Brand: Hanxia
- Origin: Shenzhen, China
- Model: HX DC002F-1.3 BT
- Manufacturer: Shenzhen Hanxia Electronic Co., Ltd
Technical Specifications
| Specification | Details |
| Electrical Characteristics | Rated Voltage: 30V DC Rated Current: 1.0A Contact Resistance: 30m MAX Insulation Resistance: 100M Min Withstand Voltage: 500V AC |
| Mechanical Performance | Mate Force: 3-20N Unmate Force: 3-20N Durability: 5000 Cycles |
| Temperature Range | -25~+70 |
| Testing Conditions (Normal) | Temperature: 5~35 Humidity: 45~85% |
| Contact Resistance Test | Measured at 1KHz small current. Specification: 0.03 below. |
| Insulation Resistance Test | Measured at DC500V potential for 1 minute across terminals and frame. Specification: 100M min. |
| Withstand Voltage Test | AC500V (50Hz or 60Hz) applied across terminals and frame for 1 minute. No breakdown. |
| Insertion and Extraction Force Test | Measured with a force gauge between plug and spring piece. Specification: 3-20N. |
| Terminal Strength Test | A static force of 500gf applied to the top of the terminal in one direction for 1 minute. No mechanical or electrical damage. |
| Soldering Test | Terminal tops dipped 2mm in solder bath at 2305 for 3 seconds. |
| Life Test | 5000 cycles of operation at a rate of 20-30 cycles per minute under no-load conditions. Contact Resistance: 40m max. Drive Force: Within 30% of initial value. |
| Heat Test | Tested after 48 hours at 802, then kept in normal condition for 30 minutes. Contact Resistance: 50m max. Insulation Resistance: 100M min. No mechanical or electrical damage. |
| Humidity Test | Tested after 48 hours at 402 and 90-95% humidity, then kept in normal condition for 30 minutes. |
| Cold Test | Tested after 48 hours at -302, then kept in normal condition for 30 minutes. |
2411211943_hanxia-HX-DC002F-1-3-BT_C41375959.pdf
Send RFQ
Stock:
MOQ:
