Temperature and humidity resistant antenna seat for electronic applications hanxia HX IPEX 1.0-4P
Manufacturer:
hanxia
Description:
Connector Receptacle IPEX Male Pin 500Ω Surface Mount
Category:
Coaxial Connector (RF) Assemblies/Coaxial Connector (RF) Assemblies
Specifications
Number Of Ports:
1
Interface:
内针
RF Series:
IPEX
Connector Type:
板端
Style:
-
Operating Temperature:
-40℃~+90℃
Frequency:
6GHz
Impedance:
50Ω
Interface Diameter:
2mm
Mfr. Part #:
HX IPEX 1.0-4P
Package:
SMD
Model Number:
HX IPEX 1.0-4P
Introduction
Antenna Seat HX IPEX 1.0-4P
This document outlines the specifications for the HX IPEX 1.0-4P antenna seat, manufactured by Shenzhen Hanxia Electronic Co., Ltd. It details the product's application conditions, environmental requirements, electrical characteristics, and rigorous testing procedures to ensure performance and reliability.
Product Attributes
- Brand: Hanxia Electronic ()
- Origin: Shenzhen, China
- Model: HX IPEX 1.0-4P
- Certifications: SGS (for environmental compliance)
Technical Specifications
| Item | Specification | Test Method |
|---|---|---|
| 1.1 Application Conditions | ||
| Operating Environment | Temperature: -40C to +90C, Relative Humidity: 25%~85% (Without loss of function) | N/A |
| Storage Environment | Temperature: -55C to +100C, Relative Humidity: 95% or Less (Without loss of function) | N/A |
| Voltage Rating | 60VAC | N/A |
| Nominal Characteristic Impedance | 50 | N/A |
| Frequency | DC0.1~6GHz | N/A |
| VSWR (Plug) | 1.3 Max. (DC0.1~3GHz), 1.5 Max. (3~6GHz) | N/A |
| VSWR (Receptacle) | 1.3 Max. (DC0.1~3GHz), 1.4 Max. (3~6GHz) | N/A |
| 1.3 Test Conditions | ||
| Temperature | 15~35 | N/A |
| Humidity | 45% ~ 75% | N/A |
| 1.4 Test Requirements and Methods | ||
| Product Appearance | All components shall be properly assembled and free of burrs, warps, scratches, broken chips, and other abnormalities. | EIA 364-18B |
| Low Level Contact Resistance | Initial: 20m Max., Final: 70m Max. | N/A |
| Insulation Resistance | Initial: 500 M Min., Final: 100 M Min. | EIA-364-21D (100V DC for 1 minute) |
| Dielectric Withstanding Voltage | Current leakage: 0.50 mA Max. No evidence of breakdown or flash burn. | EIA-364-20D, Test Method B (300V AC for 1 minute) |
| VSWR | Frequency: 100M~6GHz | Network analyzer |
| Un-mating Force | Initial: 5N Min., After 30 cycles: 3N Min. | Push-on/pull-off machine at 253mm/min |
| Crimp Strength | 5N MIN | Tensile strength machine at 253mm/min |
| Durability (30 cycles) | Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. Appearance: No abnormality. | EIA 364-09C (Mate and un-mate at 253mm/min) |
| Cable Retention Force | Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. Electrical discontinuity: No interruption > 1 micro-sec. | Apply force on cable, 100mA DC during test. |
| Vibration | Appearance: No abnormality. Electrical discontinuity: No interruption > 1 micro-sec. Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. | EIA 364-28E (10Hz-100Hz-10Hz/approx 20 min, 1.5mm half amplitude/59m/s (6G), 3 directions) |
| Physical Shock | Appearance: No abnormality. Electrical discontinuity: No interruption > 1 micro-sec. Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. | EIA 364-27B (735m/s (75G), 11msec, half sinusoidal, 6 directions) |
| Humidity | Appearance: No abnormality. Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. Insulation resistance: Initial 500M Min., After test 100M Min. DWV: No discharge or breakdown. | EIA 364-31C, Method II, Condition A (402C, 90~95% RH, 96 hours) |
| Thermal Shock | Appearance: No abnormality. Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. Insulation resistance: Initial 500M Min., After test 100M Min. | EIA 364-32E (-55C for 30 min 85C for 30 min, transition time 5 min, 5 cycles) |
| Temperature Life | Appearance: No abnormality. Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. | (902C, 96 hours) |
| H2S Gas | Appearance: No abnormality, good performance. Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. | (402C, 805% RH, H2S 31ppm, 96 hours) |
| Salt Mist | Appearance: No abnormality, good performance. Inner contact resistance: Initial 20m Max., After test 40m Max. Ground contact resistance: Initial 20m Max., After test 40m Max. | EIA 364-26B, Method 101, Condition B (352C, 51% salt water, 48 hours) |
2411220027_hanxia-HX-IPEX-1-0-4P_C41375966.pdf
Send RFQ
Stock:
MOQ:
