0.3mm Pitch FPC Connector Hanxia HX FPC 0.3-21P XGXJ H1.0 Flexible Flat Cable Connector with UL 94V-0
Manufacturer:
hanxia
Description:
FFC/FPC Connector 21 Position 0.3mm Pitch Bottom Contact Surface Mount, Right Angle
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
21P
Pitch:
0.3mm
Current Rating:
200mA
Voltage Rating (Max):
30V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX FPC 0.3-21P XGXJ H1.0
Package:
SMD,P=0.3mm,Surface Mount,Right Angle(Staggered Pins)
Model Number:
HX FPC 0.3-21P XGXJ H1.0
Introduction
Product Overview
This specification covers the 0.3mm Pitch FPC/FFC Connectors. Designed for flexible flat cable connections, these connectors offer reliable electrical and mechanical performance.
Product Attributes
- Brand: (Shenzhen Hanxia Electronic Co., Ltd)
- Model: HX FPC 0.3-21P XGXJ H1.0
- Origin: China
- Certifications: UL 94V-0 (for LCP material)
Technical Specifications
| Item | Specification | Requirement |
| 3. RATINGS | ||
| Rated Voltage (MAX) | [AC/DC (Virtual value) 50Hz] | 30V |
| Rated Current (MAX) | 0.2A | |
| Ambient temperature Range | -25~ +85 | |
| 4. PERFORMANCE | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n = number of circuits) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal / Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA energized state; vibration along X, Y, Z axes; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each axis. | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX |
| Shock | DC 1mA energized state; 490m/s {50G} shock in 6 directions; 3 strokes each. | Appearance: No Damage Discontinuity: 1 ms MAX |
| Heat Resistance | Mate applicable FPC/FFC; placed in 852 air for 96 hours; return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | Mate applicable FPC/FFC; placed in -402 air for 96 hours; return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity | Mate applicable FPC/FFC; placed in 402, 90-95% RH air for 96 hours; measured within 0.5 hours after returning to room temperature. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes. (Between cycles, transition through room temperature for 10-15 minutes) | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | 24 4 hours exposure to a salt spray from the 51% solution at 352. Post-test rinse with room temperature water and dry. | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX |
| SO2 Gas | 24 hours exposure to 50 5ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Solderability | Terminal tip immersed 0.2 mm from the tip into a 2455 tin bath for 20.5 sec. | Solder Wetting: 95% |
| Resistance to Soldering Heat | 305 sec. in a 2455 hot air oven, repeated at least 5 times. | Appearance: No Damage, No Deformation |
Product Materials
| Name | Materials | Remark |
| Main body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal | Phosphor Bronze | Metal surface plated tin |
| Contact | Phosphor Bronze | Metal surface plated tin |
2509281513_hanxia-HX-FPC-0-3-21P-XGXJ-H1-0_C25168794.pdf
Send RFQ
Stock:
MOQ:
