Compact hanxia HX FPC 0.3-11P XGXJ H1.0 connector suitable for flexible printed circuit applications
Manufacturer:
hanxia
Description:
FFC/FPC Connector 11 Position 0.3mm Pitch Bottom Contact Surface Mount, Right Angle
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
11P
Pitch:
0.3mm
Current Rating:
200mA
Voltage Rating (Max):
30V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX FPC 0.3-11P XGXJ H1.0
Package:
SMD,P=0.3mm,Surface Mount,Right Angle(Staggered Pins)
Model Number:
HX FPC 0.3-11P XGXJ H1.0
Introduction
Product Overview
This specification covers the 0.3mm Pitch FPC/FFC Connectors, designed for applications requiring reliable and compact flat flexible cable connections. The product offers robust electrical, mechanical, and environmental performance suitable for various industrial and electronic uses.
Product Attributes
- Brand: Hanxia Electronic
- Origin: Shenzhen, China
- Certifications: UL 94V-0 (for LCP material)
- Material (Main Body & Housing Lock): LCP
- Material (Terminal & Contact): Phosphor Bronze (Tin plated)
Technical Specifications
| Item | Requirement | Test Condition |
| 3. RATINGS | ||
| Rated Voltage (MAX) | 30V [AC/DC(Virtual value)50Hz] | |
| Rated Current (MAX) | 0.2A | |
| Ambient temperature Range | -25~ +85 | |
| 4. PERFORMANCE | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n = number of contacts) |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. No power applied. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. Appearance: No Damage | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X,Y,Z axes. DC 1mA applied. |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX. | 490m/s{50G}, 3 strokes in each X,Y,Z axes. DC 1mA applied. |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 852, 96 hours. Then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | -402, 96 hours. Then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Temperature: 402 Relative Humidity: 90-95% Duration: 96 Hours. Then measure within 0.5 hours at room temperature. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes. With 10-15 minutes at room temp/humidity between cycles. |
| Salt Spray | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX | 24 4 hours exposure to a salt spray from the 51% solution at 352. Followed by washing and drying. |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 50 5ppm SO2 gas at 402. |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% of wetting area | Soldering Time: 20.5 sec. Soldering Temperature: 2455 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455 Performed at least 5 times. |
2509281513_hanxia-HX-FPC-0-3-11P-XGXJ-H1-0_C25168789.pdf
Send RFQ
Stock:
MOQ:
