Precision flat flexible cable connector hanxia HX FPC 0.3-13P XGXJ H1.0 suitable for 0.2 amp current
Manufacturer:
hanxia
Description:
FFC/FPC Connector 13 Position 0.3mm Pitch Bottom Contact Surface Mount, Right Angle
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
13P
Pitch:
0.3mm
Current Rating:
200mA
Voltage Rating (Max):
30V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX FPC 0.3-13P XGXJ H1.0
Package:
SMD,P=0.3mm,Surface Mount,Right Angle(Staggered Pins)
Model Number:
HX FPC 0.3-13P XGXJ H1.0
Introduction
Product Overview
This specification covers the 0.3mm Pitch FPC/FFC Connectors, designed for various electronic applications requiring reliable and compact flat flexible cable connections.
Product Attributes
- Brand: Hanxia Electronic ()
- Origin: Shenzhen, China
- Certifications: UL 94V-0 (for LCP materials)
Technical Specifications
| Item | Requirement | Test Condition | Specification |
|---|---|---|---|
| 3. Ratings | |||
| Rated Voltage (MAX) | 30V [AC/DC(effective value) 50Hz] | ||
| Rated Current (MAX) | 0.2A | ||
| Ambient temperature Range | -25~ +85 | ||
| 4.1 Electrical Performance | |||
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of contacts) | |
| Terminal / Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 25 3mm per minute. | |
| 4.3 Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) | |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X,Y,Z axes. | Appearance: No Damage |
| Shock | Discontinuity: 1 ms MAX. | 490m/s {50G}, 3 strokes in each X,Y,Z axes. | Appearance: No Damage |
| Heat Resistance | Contact Resistance: 60 m MAX | 852, 96 hours. Then return to room temperature for 1-2 hours. | Appearance: No Damage |
| Cold Resistance | Contact Resistance: 60 m MAX | -402, 96 hours. Then return to room temperature for 1-2 hours. | Appearance: No Damage |
| Humidity | Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Temperature: 402 Relative Humidity: 90-95% Duration: 96 Hours. Then measure within 0.5 hours at room temperature. | Appearance: No Damage |
| Temperature Cycling | Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes b) 852 30 minutes (with 10-15 minutes at room temp between cycles) | Appearance: No Damage |
| Salt Spray | Contact Resistance: 60 m MAX | 24 4 hours exposure to a salt spray from the 51% solution at 352. Then wash with room temperature water and dry. | Appearance: No Damage, Corrosion |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 50 5ppm SO2 gas at 402. | |
| NH3 Gas | Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage |
| Solder Ability | Solder Wetting: 95% | Soldering Time: 20.5 sec. Soldering Temperature: 2455 Immersion depth: 0.2 mm from terminal tip. | |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455 Performed at least 5 times. | Appearance: No Damage, Deformation | |
| 5. Product Shape, Dimensions and Materials | |||
| Main body | LCP UL 94V-0 | ||
| Housing Lock | LCP UL 94V-0 | ||
| Terminal | Phosphor Bronze | ||
| Contact | Phosphor Bronze | ||
| Remark | Metal surface plated with tin | ||
2509281513_hanxia-HX-FPC-0-3-13P-XGXJ-H1-0_C25168790.pdf
Send RFQ
Stock:
MOQ:
