DC power socket hanxia HX DC044 rated 30V DC 1A with 5000 cycles durability and low contact resistance
Manufacturer:
hanxia
Description:
Power Barrel Connector Jack Through Hole, Right Angle
Category:
Audio Connectors/Power Connectors
Specifications
Mounting Type:
弯插
Connector Type:
DC电源插座
Rated Current:
1A
Working Temperature:
-25℃~+70℃
Inside Contact Diameter:
2mm
Rated Voltage:
30V
Outside Contact Diameter:
6mm
Mfr. Part #:
HX DC044
Package:
Through Hole
Model Number:
HX DC044
Introduction
Product Overview
The HX DC044 is a DC power socket from Shenzhen Hanxia Electronic Co., Ltd. It is designed for reliable electrical connections with specific mechanical and environmental performance characteristics.
Product Attributes
- Brand: (Shenzhen Hanxia Electronic Co., Ltd.)
- Product Name: DC (DC Socket)
- Part No: HX DC044
- Origin: China
Technical Specifications
| Specification | Details |
| Electrical Characteristics | Rated Voltage: 30V DC Rated Current: 1.0A Contact Resistance: 30m MAX Insulation Resistance: 100M Min Withstand Voltage: 500V AC |
| Mechanical Characteristics | Mate Force: 3-20N Unmate Force: 3-20N Durability: 5000 Cycles |
| Temperature Range | -25~+70 |
| Contact Resistance Measurement | Measured at 1KHz small current. 3.1 CONTACT RESISANCE: 0.03 below. |
| Insulation Resistance Measurement | Measured by applying DC500V potential across terminals and across terminals and frame for 1 minute. 3.2 INSULATION RESISTANCE: 100M min. |
| Withstand Voltage Measurement | AC500V (50Hz or 60Hz) applied across terminals and across terminals and frame for one minute. No breakdown. 3.3 WITHSTAND VOLTAGE. |
| Insertion and Withdrawal Force Measurement | Measured using an ergometer at the spring piece and matching plug. 4.1 INSERION AND WITHDRAW: 3-20N. |
| Terminal Strength | A static force of 500gf applied in one direction on the top of the terminal for 1 minute. No mechanical or electrical damage. 4.2 TERMINAL STRENGTH. |
| Soldering Test | Top of terminals dipped 2mm in solder bath at 2305 for 3 seconds. 5.1 SOLDERING TEST. |
| Durability Test | 5000 cycles of operation at a rate of 10-20 cycles per minute with no load. 5.2 DURABILITY: 5000 cycles. |
| Heat Test | Tested after 48 hours at 802 and 30 minutes in normal condition. Contact resistance: 50m max. Insulation resistance: 100M min. No mechanical or electrical damage. 5.3 HEAT TEST. |
| Humidity Test | Tested after 48 hours at 402 and 90-95% RH, followed by 30 minutes in normal condition. 5.4 HUMIDITY TEST. |
| Cold Test | Tested after 48 hours at 302, followed by 30 minutes in normal condition. 5.5 COLD TEST. |
2411211953_hanxia-HX-DC044_C5184833.pdf
Send RFQ
Stock:
MOQ:
