0.5mm Pitch FPC FFC Connector hanxia HX0.5-16P CTXJ-H2.0 119 for Electrical Mechanical Performance
Manufacturer:
hanxia
Description:
FFC/FPC Connector 16 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
16P
Pitch:
0.5mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX0.5-16P CTXJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX0.5-16P CTXJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors, designed for flexible flat cable applications. The product offers reliable electrical and mechanical performance, suitable for various environmental conditions.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd
- Origin: China
- Material (Main body, Housing Lock): LCP UL 94V-0
- Material (Terminal, Contact): Phosphor Bronze
- Plating: Tin plated metal surface
- Certifications: UL 94V-0 (for LCP material)
Technical Specifications
| Item | Requirement | Test Condition |
| RATINGS | ||
| Rated Voltage (MAX) | 50V (AC/DC, virtual value 50Hz) | |
| Rated Current (MAX) | 0.4A | |
| Ambient temperature Range | -25+85 | |
| PERFORMANCE | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| 4.2 Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC (0.3mm thick) at a speed of 253mm/minute. |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thick) at a speed of 253mm/minute. |
| Terminal /Housing Retention Force | 3.92N MIN | Pull the terminal at a speed of 25 3mm per minute. |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at a speed rate of less than 10 cycles/minute, without power. |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX. Appearance: No Damage. | DC 1mA energized state; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes. |
| Shock | Discontinuity: 1 ms MAX. Appearance: No Damage. | 490m/s{50G}, 3 strokes in each X.Y.Z. axes, DC 1mA energized state. |
| Heat Resistance | Contact Resistance: 60 m MAX. Appearance: No Damage. | 852, 96 hours in air, then return to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance: 60 m MAX. Appearance: No Damage. | -402, 96 hours in air, then return to room temperature for 1-2 hours. |
| Humidity | Contact Resistance: 60 m MAX. Dielectric Strength: Must meet 4.1.3. Insulation Resistance: 20 M MIN. Appearance: No Damage. | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours, then measure within 0.5 hours after returning to room temperature. |
| Temperature Cycling | Contact Resistance: 60 m MAX. Appearance: No Damage. | 5 cycles of: a) -553 30 minutes b) 852 30 minutes, with 10-15 minutes at normal temperature and humidity between cycles. |
| Salt Spray | Contact Resistance: 60 m MAX. Appearance: No Damage, No Corrosion. | 24 4 hours exposure to a salt spray from a 51% solution at 352. Followed by washing with room temperature water and drying. |
| SO2 Gas | Contact Resistance: 60 m MAX. | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas | Contact Resistance: 60 m MAX. Appearance: No Damage. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder ability | Solder Wetting: 95% coverage. | Soldering Time: 20.5 sec. Soldering Temperature: 2455. Measured 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation. | Soldering Time: 305 sec. Soldering Temperature: 2455. Performed at least 5 times in a hot air furnace. |
2509281512_hanxia-HX0-5-16P-CTXJ-H2-0-119_C5691139.pdf
Send RFQ
Stock:
MOQ:
