phone jack hanxia HX PJ-320A-3P DIP designed for stable connection and high temperature resistance nylon
Manufacturer:
hanxia
Description:
3.5mm Headphone Jack 500mA 30V Through Hole
Category:
Audio Connectors/Audio Connectors
Specifications
Operating Temperature:
-30℃~+70℃
Connector Type:
3.5mm耳机座
Voltage Rating (Max):
30V
Current Rating:
500mA
Mfr. Part #:
HX PJ-320A-3P DIP
Package:
Through Hole
Model Number:
HX PJ-320A-3P DIP
Introduction
Product Overview
The HX PJ-320A-3P DIP is a phone jack designed for reliable electrical and mechanical performance. It operates within a temperature range of -30C to 70C and is built to withstand standard atmospheric conditions. This product is suitable for applications requiring a durable and stable connection.
Product Attributes
- Brand: (Shenzhen Hanxia Electronic Co., Ltd)
- Model No: HJ-320B, HX PJ-320A-3P DIP
- Origin: (Shenzhen)
- Material (Nylon): High temperature resistance (260C 5)
Technical Specifications
| Item | Test Conditions | Performance Specification |
| Electrical Rating | DC 30V - 0.5A | |
| Contact Resistance | Measured at small current (100mA) at 1000Hz | 0.03 |
| Insulation Resistance | Apply 500V DC for 1 min (between body and conductor, between conductors not to be contact, between conductors not to be when plug is inserted) | 100M |
| Dielectric Strength | AC 500V (50Hz)/min (trip current: 0.5mA) (between body and conductor, between conductors not to be contact, between conductors not to be when plug is inserted) | No damage, arcing, or breakdown |
| Insertion Force | Measured after connecting and disconnecting using standard plug gauge 3 times | 3-20N |
| Disconnection Force | Measured after connecting and disconnecting using standard plug gauge 3 times | 3-20N |
| Terminal Strength | Static load of 0.1N/m (1kgf/cm) applied to terminal tip for 1 min in any direction | No cracks, looseness, or play; satisfied electrical and mechanical characteristics |
| Solderability Test | Terminal top dipped 1mm in solder bath at 2405 for 30.5 seconds | Solder wetting time 3 sec; Soldering area > 75% |
| Resistance to Soldering Heat Test (Reflow) | Preheat: 180 for 120s; Peak temp: 2605 within 20s | No deformation of case, no excessive looseness of terminals; satisfied electrical and mechanical characteristics |
| Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 3305, application time 30.5 sec, no excessive pressure on terminal | No deformation of case, no excessive looseness of terminals; satisfied electrical and mechanical characteristics |
| Humidity Test | Stored at 402 and 90%-96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr | Appearance no damage; satisfied mechanical and electrical characteristics |
| Heat Test | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 Hr | Appearance no damage; satisfied mechanical and electrical characteristics |
| Cold Test | Stored at -253 for 96 hours, then subjected to controlled recovery for 1 Hr | Appearance no damage; satisfied mechanical and electrical characteristics |
| Life Test | 5000 cycles (10-20 cycles/min) at rating condition (non-inductive load) | Contact Resistance 0.1; Disconnection Force 3-20N; satisfied mechanical and electrical characteristics |
| Cold & Heat Shock Test | 5 cycles of specified temperature profile, then 30 min in room ambient condition | No deformation or cracks in molded part; Insertion & Extraction Force: 3-20N; Contact Resistance: Max.30m; Insulation Resistance: Min.100 M; Dielectric Withstanding Voltage: 500VAC/min (between terminals) |
2409272203_hanxia-HX-PJ-320A-3P-DIP_C19189087.pdf
Send RFQ
Stock:
MOQ:
