Flexible Flat Cable Connector Hanxia HX0.5-6P XJH2.0 043 0.5mm Pitch FPC FFC Connector with Tin Plated Contacts
Manufacturer:
hanxia
Description:
FFC/FPC Connector 6 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
6P
Pitch:
0.5mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX0.5-6P XJH2.0 043
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX0.5-6P XJH2.0 043
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors (Part No: HX FPC 0.5-6P XJH2.0 043) from Shenzhen Hanxia Electronic Co., Ltd. These connectors are designed for flexible flat cable applications.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd.
- Origin: Shenzhen, China
- Material (Main Body): LCP UL 94V-0
- Material (Housing Lock): LCP UL 94V-0
- Material (Terminal/Contact): Phosphor Bronze
- Plating (Metal Surface): Tin Plated
Technical Specifications
| Item | Specifications | Test Condition | Requirement |
| Ratings | Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V |
| Rated Current (MAX) | 0.4A | ||
| Ambient Temperature Range | -25+85 | ||
| Electrical Performance | Contact Resistance | Mate applicable FPC/FFC, measure by dry circuit, 20mV MAX, 10mA | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC, apply 500V DC between adjacent terminals or ground | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC, apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground | No Breakdown | |
| Mechanical Performance | Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute | Locking: 1.96*n (N) MAX, Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN | |
| Environmental Performance | Repeated Insertion and Withdrawal | 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load (UL 498) | 30 MAX | |
| Vibration | DC 1mA, Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X.Y.Z. axes | Appearance: No Damage, Contact Resistance: 60 m MAX, Discontinuity: 1 ms MAX | |
| Shock | Shock | 490m/s{50G}, 3 strokes in each X.Y.Z. axes | Appearance: No Damage, Discontinuity: 1 ms MAX |
| Heat Resistance | 852, 96 hours | Appearance: No Damage, Contact Resistance: 60 m MAX | |
| Cold Resistance | Cold Resistance | -402, 96 hours | Appearance: No Damage, Contact Resistance: 60 m MAX |
| Humidity | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours | Appearance: No Damage, Contact Resistance: 60 m MAX, Dielectric Strength: Must meet 4.1.3, Insulation Resistance: 20 M MIN | |
| Temperature Cycling | Temperature Cycling | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes | Appearance: No Damage, Contact Resistance: 60 m MAX |
| Salt Spray | 24 4 hours exposure to a salt spray from the 51% solution at 352 | Appearance: No Damage, Corrosion, Contact Resistance: 60 m MAX | |
| SO2 Gas | 24 hours exposure to 505ppm. SO2 gas at 402. | Contact Resistance: 60 m MAX | |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution | Appearance: No Damage, Contact Resistance: 60 m MAX | |
| Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2455, 0.2 mm from terminal tip | Solder Wetting: 95% or more | |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455 | Appearance: No Damage, Deformation |
2509281512_hanxia-HX0-5-6P-XJH2-0-043_C5691099.pdf
Send RFQ
Stock:
MOQ:
