DC Jack Connector hanxia HX DC007B-2.0 Rated 20V 7A with Low Contact Resistance and High Voltage
Manufacturer:
hanxia
Description:
Power Barrel Connector Jack 2mm ID 6mm OD Through Hole, Right Angle
Category:
Audio Connectors/Power Connectors
Specifications
Mounting Type:
弯插
Connector Type:
DC电源插座
Rated Current:
7A
Working Temperature:
-25℃~+70℃
Rated Voltage:
20V
Inside Contact Diameter:
2mm
Outside Contact Diameter:
6.8mm
Mfr. Part #:
HX DC007B-2.0
Package:
Through Hole
Model Number:
HX DC007B-2.0
Introduction
Product Overview
This document details the specifications for the Shenzhen Hanxia Electronic Co., Ltd. DC Jack, model HX DC007B-2.0. It outlines the electrical, mechanical, and environmental performance characteristics of the product, designed for various electronic applications.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd.
- Origin: Shenzhen, China
- Model: HX DC007B-2.0
Technical Specifications
| Specification | Details |
| Electrical Characteristics | Rated voltage: 20V DC Rated current: 7.0A Contact resistance: 30m MAX Insulation resistance: 100M Min Withstand Voltage: 500V AC |
| Mechanical Performance | Mate force: 3-30N Unmate force: 3-30N Durability: 5000 Cycles |
| Temperature Range | -25~+70 |
| Contact Resistance Measurement | Measured at 1KHz small current. 30m MAX. |
| Insulation Resistance Measurement | Measured by applying DC500V potential across terminals and across terminals and frame for 1 minute. 100M Min. |
| Withstand Voltage Measurement | AC500V (50Hz or 60Hz) applied across terminals and across terminals and frame for one minute. No breakdown. |
| Insertion and Extraction Force | Measured with a force gauge between the plug and the spring piece. 3-30N. |
| Terminal Strength | A static force of 500gf applied in one direction on the top of the terminal for 1 minute. No mechanical or electrical damage. |
| Soldering Test (Wettability) | Top of terminals dipped 2mm in solder bath at 2305 for 3 seconds. |
| Life Test (Durability) | 5000 cycles of operation at a rate of 20-30 cycles per minute under no-load conditions. Contact resistance 40m max. Drive force within the range of the initial value 30. |
| Heat Test (Heat Resistance) | Tested after being kept in an 802 environment for 48 hours, then in normal conditions for 30 minutes. Contact resistance 50m max. Insulation resistance 100M min. No mechanical or electrical damage. |
| Humidity Test (Moisture Resistance) | Tested after being kept in a 402, 90-95% RH environment for 48 hours, then in normal conditions for 30 minutes. |
| Cold Test | Tested after being kept in a -302 environment for 48 hours, then in normal conditions for 30 minutes. |
2411211945_hanxia-HX-DC007B-2-0_C19189081.pdf
Send RFQ
Stock:
MOQ:
