0.5mm Pitch FPC FFC Connector Hanxia HX0.5-36P CTSJ-H2.0 119 for Electrical and Mechanical Performance
Manufacturer:
hanxia
Description:
FFC/FPC Connector 36 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
36P
Pitch:
0.5mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX0.5-36P CTSJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX0.5-36P CTSJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors (Model: HX0.5-36P CTSJ-H2.0 119). Designed for flexible flat cable applications, these connectors offer reliable electrical and mechanical performance.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd
- Origin: China
- Material (Main body/Locking): LCP UL 94V-0
- Material (Terminal/Contact): Phosphor Bronze (Tin plated)
- Certifications: UL 498 (referenced for Temperature Rise)
Technical Specifications
| Item | Specification | Test Condition | Requirement |
| Ratings | |||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz 50V | ||
| Rated Current (MAX) | 0.4A | ||
| Ambient Temperature Range | -25+85 | ||
| Performance | |||
| 4.1 Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of positions) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN | |
| 4.3 Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Contact Resistance | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX | |
| Vibration | Contact Resistance | DC 1mA energization. Vibration along XYZ axes: Amplitude 1.5mm P-P, Sweep time 10-55-10Hz/min, Duration 2 hours. | 60 m MAX Discontinuity: 1 ms MAX |
| Vibration | Appearance | DC 1mA energization. Vibration along XYZ axes: Amplitude 1.5mm P-P, Sweep time 10-55-10Hz/min, Duration 2 hours. | No Damage |
| Shock | Contact Resistance | DC 1mA energization. 490m/s {50G}, 3 strokes in each X.Y.Z. axes. | 60 m MAX Discontinuity: 1 ms MAX |
| Shock | Appearance | DC 1mA energization. 490m/s {50G}, 3 strokes in each X.Y.Z. axes. | No Damage |
| Heat Resistance | Contact Resistance | Mate applicable FPC/FFC, place in 852 air for 96 hours, then return to room temperature for 1-2 hours. | 60 m MAX |
| Heat Resistance | Appearance | Mate applicable FPC/FFC, place in 852 air for 96 hours, then return to room temperature for 1-2 hours. | No Damage |
| Cold Resistance | Contact Resistance | Mate applicable FPC/FFC, place in -402 air for 96 hours, then return to room temperature for 1-2 hours. | 60 m MAX |
| Cold Resistance | Appearance | Mate applicable FPC/FFC, place in -402 air for 96 hours, then return to room temperature for 1-2 hours. | No Damage |
| Humidity | Contact Resistance | Mate applicable FPC/FFC, place in 402, 90-95% RH for 96 hours, then measure within 0.5 hours after returning to room temperature. | 60 m MAX |
| Humidity | Insulation Resistance | Mate applicable FPC/FFC, place in 402, 90-95% RH for 96 hours, then measure within 0.5 hours after returning to room temperature. | 20 M MIN |
| Humidity | Dielectric Strength | Mate applicable FPC/FFC, place in 402, 90-95% RH for 96 hours, then measure within 0.5 hours after returning to room temperature. | Must meet 4.1.3 |
| Humidity | Appearance | Mate applicable FPC/FFC, place in 402, 90-95% RH for 96 hours, then measure within 0.5 hours after returning to room temperature. | No Damage |
| Temperature Cycling | Contact Resistance | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes. With 10-15 minutes at room temperature between cycles. | 60 m MAX |
| Temperature Cycling | Appearance | 5 cycles of: a) -553 30 minutes; b) 852 30 minutes. With 10-15 minutes at room temperature between cycles. | No Damage |
| Salt Spray | Contact Resistance | 24 4 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temperature water and dry. | 60 m MAX |
| Salt Spray | Appearance | 24 4 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temperature water and dry. | No Damage, Corrosion |
| SO2 Gas | Contact Resistance | 24 hours exposure to 505ppm SO2 gas at 402. | 60 m MAX |
| NH3 Gas | Contact Resistance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | 60 m MAX |
| NH3 Gas | Appearance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | No Damage |
| Solder Ability | Solder Wetting | Soldering Time20.5 sec. Soldering Temperature2455. 0.2 mm from terminal tip. | 95% |
| Resistance to Soldering Heat | Appearance | Soldering Time305 sec. Soldering Temperature2455. Performed at least 5 times. | No Damage, Deformation |
2509281512_hanxia-HX0-5-36P-CTSJ-H2-0-119_C5691124.pdf
Send RFQ
Stock:
MOQ:
