0.5mm Pitch FPC FFC Flat Cable Connector hanxia HX0.5-6P CTXJ-H2.0 119 with Phosphor Bronze Contacts
Manufacturer:
hanxia
Description:
FFC/FPC Connector 6 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
6P
Pitch:
0.5mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX0.5-6P CTXJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX0.5-6P CTXJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors (Product Name: FFC/FPC Flat Cable Connector). Designed for reliable connection of flexible flat cables, these connectors offer a maximum rated voltage of 50V AC/DC and a maximum rated current of 0.4A, operating within an ambient temperature range of -25 to +85.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd
- Origin: Shenzhen, China
- Certifications: UL 94V-0 (for LCP material)
- Material (Main Body): LCP UL 94V-0
- Material (Housing Lock): LCP UL 94V-0
- Material (Terminal/Contact): Phosphor Bronze (tin-plated surface)
Technical Specifications
| Item | Specification | Test Condition | Requirement |
| 4.1 Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 3.92N MIN | |
| 4.3 Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX | |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX | |
| Vibration | DC 1mA under power. Vibration along XYZ axes, amplitude 1.5mm P-P, sweep time 10-55-10Hz/min, duration 2 hours in each axis. | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | |
| Shock | DC 1mA under power. 490m/s{50G}, 3 strokes in each X.Y.Z. axes. | Appearance: No Damage Discontinuity: 1 ms MAX | |
| Heat Resistance | Mate applicable FPC/FFC, place in 852 air for 96 hours, then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX | |
| Cold Resistance | Mate applicable FPC/FFC, place in -402 air for 96 hours, then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX | |
| Humidity | Mate applicable FPC/FFC, place in 402, 90-95% RH air for 96 hours, measure within 0.5 hours after returning to room temperature. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at room temperature between cycles. | Appearance: No Damage Contact Resistance: 60 m MAX | |
| Salt Spray | Mate applicable FPC/FFC, 24 4 hours exposure to a salt spray from the 51% solution at 352. Post-test wash with room temperature water and dry. | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX | |
| SO2 Gas Resistance | Mate applicable FPC/FFC, 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX | |
| NH3 Gas Resistance | Mate applicable FPC/FFC, 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX | |
| Solderability | Immerse terminal tip 0.2 mm from the reference plane into a 2455 tin bath for 20.5 sec. | Solder Wetting: 95% | |
| Resistance to Soldering Heat | 305 sec in a 2455 hot air oven, at least 5 times. | Appearance: No Damage, No Deformation | |
2509281512_hanxia-HX0-5-6P-CTXJ-H2-0-119_C5691131.pdf
Send RFQ
Stock:
MOQ:
