FPC FFC Connector hanxia HX 1.0-4P XGXJ-H2.0 with Low Contact Resistance and High Insulation Resistance
Manufacturer:
hanxia
Description:
FFC/FPC Connector 4 Position 1mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
4P
Pitch:
1mm
Current Rating:
500mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX 1.0-4P XGXJ-H2.0
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
HX 1.0-4P XGXJ-H2.0
Introduction
Product Overview
This specification covers the 1.0mm Pitch FPC/FFC Connectors, designed for flexible flat cable connections. They offer reliable electrical and mechanical performance suitable for various environmental conditions.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd.
- Origin: China
- Certifications: UL 94V-0
- Materials: Main body: LCP UL 94V-0; Housing Lock: LCP UL 94V-0; Terminal/Contact: Phosphor Bronze (Tin plated)
Technical Specifications
| Item | Requirement | Test Condition |
| 3. Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC(effective value)50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient temperature Range | -25~ +85 | |
| 4. Performance | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| 4.2 Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Terminal/Housing Retention Force | 0.25N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| 4.3 Environmental and Others | ||
| Contact Resistance (Repeated Insertion) | 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Contact Resistance (Vibration) | 60 m MAX | DC 1mA under energized state; Vibration along XYZ axes; Amplitude: 1.5mm; Frequency: 10-55-10Hz/min; Duration: 2 hours in each X,Y,Z axes. |
| Discontinuity (Vibration) | 1 ms MAX. | DC 1mA under energized state; Vibration along XYZ axes; Amplitude: 1.5mm; Frequency: 10-55-10Hz/min; Duration: 2 hours in each X,Y,Z axes. |
| Appearance (Vibration) | No Damage | DC 1mA under energized state; Vibration along XYZ axes; Amplitude: 1.5mm; Frequency: 10-55-10Hz/min; Duration: 2 hours in each X,Y,Z axes. |
| Contact Resistance (Shock) | 60 m MAX | DC 1mA under energized state; 490m/s2{50G}, 3 strokes in each X,Y,Z axes. |
| Discontinuity (Shock) | 1 ms MAX. | DC 1mA under energized state; 490m/s2{50G}, 3 strokes in each X,Y,Z axes. |
| Appearance (Shock) | No Damage | DC 1mA under energized state; 490m/s2{50G}, 3 strokes in each X,Y,Z axes. |
| Contact Resistance (Heat Resistance) | 60 m MAX | Mate applicable FPC/FFC; 852 in air for 96 hours; then return to room temperature for 1-2 hours. |
| Appearance (Heat Resistance) | No Damage | Mate applicable FPC/FFC; 852 in air for 96 hours; then return to room temperature for 1-2 hours. |
| Contact Resistance (Cold Resistance) | 60 m MAX | Mate applicable FPC/FFC; -402 in air for 96 hours; then return to room temperature for 1-2 hours. |
| Appearance (Cold Resistance) | No Damage | Mate applicable FPC/FFC; -402 in air for 96 hours; then return to room temperature for 1-2 hours. |
| Contact Resistance (Humidity) | 60 m MAX | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours; then measure within 0.5 hours after returning to room temperature. |
| Insulation Resistance (Humidity) | 20 M MIN | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours; then measure within 0.5 hours after returning to room temperature. |
| Dielectric Strength (Humidity) | Must meet 4.1.3 | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours; then measure within 0.5 hours after returning to room temperature. |
| Appearance (Humidity) | No Damage | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours; then measure within 0.5 hours after returning to room temperature. |
| Contact Resistance (Temperature Cycling) | 60 m MAX | 5 cycles of: a) -553 30 minutes b) 852 30 minutes; 10-15 minutes at room temp/humidity between cycles. |
| Appearance (Temperature Cycling) | No Damage | 5 cycles of: a) -553 30 minutes b) 852 30 minutes; 10-15 minutes at room temp/humidity between cycles. |
| Contact Resistance (Salt Spray) | 60 m MAX | 244 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temp water and dry. |
| Appearance (Salt Spray) | No Damage, Corrosion | 244 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temp water and dry. |
| Contact Resistance (SO2 Gas) | 60 m MAX | 24 hours exposure to 50 5ppm SO2 gas at 402. |
| Contact Resistance (NH3 Gas) | 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Appearance (NH3 Gas) | No Damage | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder Wetting | 95% or more | Soldering Time: 20.5 sec. Soldering Temperature: 2455. 0.2 mm from terminal tip. |
| Appearance (Resistance to Soldering Heat) | No Damage, Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455. At least 5 times. |
2411220032_hanxia-HX-1-0-4P-XGXJ-H2-0_C41418892.pdf
Send RFQ
Stock:
MOQ:
