Flexible flat cable connector hanxia HX FPC 0.5-18P HYH2.0 with LCP UL 94V-0 housing and 0.5mm pitch
Manufacturer:
hanxia
Description:
FFC/FPC Connector 18 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
18P
Pitch:
0.5mm
Current Rating:
500mA
Voltage Rating (Max):
50V
Contact Type:
双侧触点/上下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
金
Contact Material:
磷青铜
Mfr. Part #:
HX FPC 0.5-18P HYH2.0
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX FPC 0.5-18P HYH2.0
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors, designed for flexible flat cable connections. These connectors offer reliable electrical and mechanical performance, suitable for a wide range of operating temperatures and environmental conditions.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd
- Origin: China
- Material (Main body/Housing Lock): LCP UL 94V-0
- Material (Terminal/Contact): Phosphor Bronze (Tin Plated)
Technical Specifications
| Item | Requirement | Test Condition |
| Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC (Virtual value) 50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of poles) |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute. Duration: 2 hours in each X.Y.Z. axes. (DC 1mA) |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX. | 490m/s{50G}, 3 strokes in each X.Y.Z. axes. (DC 1mA) |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 852, 96 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | -402, 96 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Temperature: 402, Relative Humidity: 90-95%. Duration: 96 Hours. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes b) 852 30 minutes |
| Salt Spray | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX | 48 4 hours exposure to a salt spray from the 51% solution at 352. |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm. SO2 gas at 402. |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder Ability | Solder Wetting: 95% or more | Soldering Time: 20.5 sec. Soldering Temperature: 2455. 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455. Performed at least 5 times. |
2411211954_hanxia-HX-FPC-0-5-18P-HYH2-0_C7502871.pdf
Send RFQ
Stock:
MOQ:
