0.5mm Pitch FPC FFC Connector hanxia HX0.5-30P CTSJ-H2.0 119 with Electrical Mechanical Performance
Manufacturer:
hanxia
Description:
FFC/FPC Connector 30 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
30P
Pitch:
0.5mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX0.5-30P CTSJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX0.5-30P CTSJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors, designed for flexible flat cable applications. These connectors offer reliable electrical and mechanical performance, suitable for a wide range of operating temperatures and environmental conditions.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd
- Origin: Shenzhen, China
- Material: Main body and Housing Lock: LCP UL 94V-0; Terminal and Contact: Phosphor Bronze (plated with tin)
Technical Specifications
| Item | Specification | Requirement |
| 3. RATINGS | ||
| Rated Voltage (MAX) | [AC/DC (Virtual value) 50Hz | 50V] |
| Rated Current (MAX) | 0.4A | |
| Ambient Temperature Range | -25+85 | |
| 4. PERFORMANCE | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500 M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n = number of positions) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 3.92N MIN |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA under power. Vibration along XYZ axes, Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X.Y.Z. axes. | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX |
| Shock | DC 1mA under power. 490m/s{50G}, 3 strokes in each X.Y.Z. axes. | Appearance: No Damage Discontinuity: 1 ms MAX |
| Heat Resistance | 852, 96 hours, then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | -402, 96 hours, then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours, then measure within 0.5 hours at room temperature. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | 24 4 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temperature water and dry. | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX |
| SO2 Gas | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Solder ability | Soldering Time: 20.5 sec. Soldering Temperature: 2455 0.2 mm from terminal tip. | Solder Wetting: 95% Area |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455 | Appearance: No Damage, Deformation |
| 5. PRODUCT SHAPE, DIMENSIONS AND MATERIALS | ||
| Main body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal | Phosphor Bronze | Metal surface plated with tin |
| Contact | Phosphor Bronze | |
2509281512_hanxia-HX0-5-30P-CTSJ-H2-0-119_C5691123.pdf
Send RFQ
Stock:
MOQ:
