Flexible flat cable connector hanxia HX FPC 0.5-8P HYH2.0 0.5mm pitch suitable for electrical connections
Manufacturer:
hanxia
Description:
FFC/FPC Connector 8 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
8P
Pitch:
0.5mm
Current Rating:
500mA
Voltage Rating (Max):
50V
Contact Type:
双侧触点/上下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
金
Contact Material:
磷青铜
Mfr. Part #:
HX FPC 0.5-8P HYH2.0
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX FPC 0.5-8P HYH2.0
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors, specifically the HX FPC 0.5-8P HYH2.0 model. Designed for flexible flat cable connections, these connectors offer reliable electrical and mechanical performance within a specified temperature range.
Product Attributes
- Brand: HX
- Origin: Shenzhen Hanxia Electronic Co., Ltd
- Certifications: UL 94V-0 (for LCP material)
Technical Specifications
| Item | Specification | Requirement | Test Condition |
| Ratings | |||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V | |
| Rated Current (MAX) | 0.5A | ||
| Ambient Temperature Range | -25+85 | ||
| Electrical Performance | |||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | |
| Mechanical Performance | |||
| Locking and Withdrawal Force | Locking | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Withdrawal | 0.49*n (N) MIN | ||
| Terminal / Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 25 3mm per minute. | |
| Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Contact Resistance | 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) | |
| Vibration | Contact Resistance | 60 m MAX | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. DC 1mA applied. |
| Discontinuity | 1 ms MAX | ||
| Shock | Appearance | No Damage | 490m/s{50G}, 3 strokes in each X.Y.Z. axes. DC 1mA applied. |
| Discontinuity | 1 ms MAX | ||
| Heat Resistance | Appearance | No Damage | 852, 96 hours. Then return to room temperature for 1-2 hours. |
| Contact Resistance | 60 m MAX | ||
| Cold Resistance | Appearance | No Damage | -402, 96 hours. Then return to room temperature for 1-2 hours. |
| Contact Resistance | 60 m MAX | ||
| Humidity | Appearance | No Damage | Temperature: 402 Relative Humidity: 90-95% Duration: 96 Hours. Then measure within 0.5 hours at room temperature. |
| Contact Resistance | 60 m MAX | ||
| Insulation Resistance | 20 M MIN | ||
| Temperature Cycling | Appearance | No Damage | 5 cycles of: a) -553 30 minutes b) 852 30 minutes. Then return to room temperature for 10-15 minutes between cycles. |
| Contact Resistance | 60 m MAX | ||
| Salt Spray | Appearance | No Damage, Corrosion | 48 4 hours exposure to a salt spray from the 51% solution at 352. Then wash with room temperature water and dry. |
| Contact Resistance | 60 m MAX | ||
| SO2 Gas | Contact Resistance | 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas | Appearance | No Damage | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Contact Resistance | 60 m MAX | ||
| Solderability | Solder Wetting | 95% | Soldering Time: 20.5 sec. Soldering Temperature: 2455. 0.2 mm from terminal tip. |
| (Solderability) | |||
| Resistance to Soldering Heat | Appearance | No Damage, Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455. Performed at least 5 times. |
Product Materials
| Name | Materials | Remark |
| Main Body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal | Phosphor Bronze | Metal surface plated with tin |
| Contact | Phosphor Bronze |
2411271641_hanxia-HX-FPC-0-5-8P-HYH2-0_C7502866.pdf
Send RFQ
Stock:
MOQ:
