Flexible Flat Cable 0.5mm Pitch FPC FFC Connector Hanxia HX0.5-4P CTXJ-H2.0 119 with Rated Voltage 50V
Manufacturer:
hanxia
Description:
FFC/FPC Connector 4 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
4P
Pitch:
0.5mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX0.5-4P CTXJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX0.5-4P CTXJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors (HX0.5-4P CTXJ-H2.0 119) from Shenzhen Hanxia Electronic Co., Ltd. Designed for flexible flat cable applications, these connectors offer reliable electrical and mechanical performance within a specified temperature range.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd.
- Origin: Shenzhen, China
- Product Name: FFC/FPC (FFC/FPC Flat Cable Connector)
- Part Number: HX0.5-4P CTXJ-H2.0 119
- Material Code: 119
- Certifications: UL 94V-0 (for LCP materials)
Technical Specifications
| Item | Specification | Requirement |
| Ratings | ||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V |
| Rated Current (MAX) | 0.4A | |
| Ambient Temperature Range | -25+85 | |
| Performance | ||
| Electrical Performance | Contact Resistance | 30 m MAX (Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA) |
| Insulation Resistance | 500 M MIN (Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground) | |
| Dielectric Strength | No Breakdown (Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground) | |
| Mechanical Performance | Locking and Withdrawal Force | Locking: 1.96*n (N) MAX; Withdrawal: 0.49*n (N) MIN (Insert and extract applicable FFC at the speed rate of 253mm/minute, for 0.3mm thick FFC) |
| Terminal/Housing Retention Force | 3.92N MIN (Pull the terminal at the speed rate of 25 3mm per minute) | |
| Environmental and Others | Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX (Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute, no power) |
| Temperature Rise | 30 MAX (Carrying rated current load, UL 498) | |
| Vibration | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX (DC 1mA under power; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes) | |
| Shock | Appearance: No Damage; Discontinuity: 1 ms MAX (490m/s{50G}, 3 strokes in each X.Y.Z. axes, DC 1mA under power) | |
| Heat Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX (852, 96 hours, then return to room temp for 1-2 hours) | |
| Cold Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX (-402, 96 hours, then return to room temp for 1-2 hours) | |
| Humidity | Appearance: No Damage; Contact Resistance: 60 m MAX; Dielectric Strength: Must meet 4.1.3; Insulation Resistance: 20 M MIN (402, 90-95% RH, 96 hours, then measure within 0.5 hours at room temp) | |
| Temperature Cycling | Appearance: No Damage; Contact Resistance: 60 m MAX (5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with room temp recovery in between) | |
| Salt Spray | Appearance: No Damage, Corrosion; Contact Resistance: 60 m MAX (24 4 hours exposure to 51% salt spray solution at 352) | |
| SO2 Gas | Contact Resistance: 60 m MAX (24 hours exposure to 505ppm SO2 gas at 402) | |
| NH3 Gas | Appearance: No Damage; Contact Resistance: 60 m MAX (40 minutes exposure to NH3 gas from 28% Ammonia solution) | |
| Solderability | Solder Wetting: 95% (Soldering Time: 20.5 sec; Soldering Temperature: 2455; 0.2 mm from terminal tip) | |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation (Soldering Time: 305 sec; Soldering Temperature: 2455; at least 5 times) | |
| Product Shape, Dimensions and Materials | ||
| Main Body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal/Contact | Phosphor Bronze (Surface plated tin) | |
2509281512_hanxia-HX0-5-4P-CTXJ-H2-0-119_C5691129.pdf
Send RFQ
Stock:
MOQ:
