FFC FPC flat cable connector hanxia HX0.5-60P CTSJ-H2.0 119 with 0.5mm pitch electrical performance
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
60P
Pitch:
0.5mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX0.5-60P CTSJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX0.5-60P CTSJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors, designed for flexible flat cable applications. They offer reliable electrical and mechanical performance suitable for various environmental conditions.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd
- Origin: China
- Product Name: FFC/FPC Flat Cable Connector
- Part Number: HX0.5-60P CTSJ-H2.0
- Material: LCP (Main body, Housing Lock), Phosphor Bronze (Terminal, Contact)
- Certifications: UL 94V-0 (for LCP materials)
Technical Specifications
| Item | Specification/Requirement | Test Condition |
| Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC (Virtual Value) 50Hz] | |
| Rated Current (MAX) | 0.4A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at the speed rate of 253mm/minute. |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX Appearance: No Damage | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes (under DC 1mA). |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX | 490m/s {50G}, 3 strokes in each X.Y.Z. axes (under DC 1mA). |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 852, 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | -402, 96 hours, then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes b) 852 30 minutes (with intermediate room temp. stabilization). |
| Salt Spray | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX | 24 4 hours exposure to a salt spray from the 51% solution at 352. |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% | Soldering Time: 20.5 sec. Soldering Temperature: 2455 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455 (at least 5 times). |
2509281512_hanxia-HX0-5-60P-CTSJ-H2-0-119_C5691128.pdf
Send RFQ
Stock:
MOQ: