0.5mm pitch locking FPC FFC connector hanxia HX 0.5-6PQFHY-H2.0 for electronic flexible flat cable
Manufacturer:
hanxia
Description:
FFC/FPC Connector 6 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
6P
Pitch:
0.5mm
Current Rating:
500mA
Voltage Rating (Max):
50V
Contact Type:
双侧触点/上下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
金
Contact Material:
磷青铜
Mfr. Part #:
HX 0.5-6PQFHY-H2.0
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX 0.5-6PQFHY-H2.0
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors (series Locking). Designed for flexible flat cable connections, these connectors offer a secure locking mechanism suitable for various electronic applications.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd
- Origin: China
- Certifications: UL 94V-0 (for LCP material)
Technical Specifications
| Item | Specification | Test Condition | Requirement |
| Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | ≤20 mΩ MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500MΩ MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1minute between adjacent terminal or ground. | No Breakdown | |
| Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 25±3mm/minute. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | |
| Terminal /Housing Retention Force | Pull the terminal at the speed rate of 25 ± 3mm per minute | 3.92N MIN | |
| Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: ≤60 mΩ MAX | |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 ℃ MAX | |
| Vibration | DC 1mA energized state; Vibration along XYZ three directions; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes | Appearance: No Damage Contact Resistance: ≤60 mΩ MAX Discontinuity: 1 ms MAX. | |
| Shock | DC 1mA energized state; 490m/s2{50G}, 3 strokes in each X.Y.Z. axes. | Appearance: No Damage Discontinuity: 1 ms MAX. | |
| Heat Resistance | Mate applicable FPC/FFC; Place in 85±2℃ air for 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: ≤60 mΩ MAX | |
| Cold Resistance | Mate applicable FPC/FFC; Place in -40±2℃ air for 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: ≤60 mΩ MAX | |
| Humidity | Mate applicable FPC/FFC; Place in 40±2℃, 90-95% RH air for 96 hours; measure within 0.5 hours after returning to room temperature. | Appearance: No Damage Contact Resistance: ≤60 mΩ MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 MΩ MIN | |
| Temperature Cycling | 5 cycles of: a) -55±3℃ 30 minutes b) 85±2℃ 30 minutes (with 10-15 minutes at room temp between cycles) | Appearance: No Damage Contact Resistance: ≤60 mΩ MAX | |
| Salt Spray | Mate applicable FPC/FFC; 24 ± 4 hours exposure to a salt spray from the 5±1% solution at 35±2℃. | Appearance: No Damage, Corrosion Contact Resistance: ≤60 mΩ MAX | |
| SO2 Gas | Mate applicable FPC/FFC; 24 hours exposure to 50±5ppm SO2 gas at 40±2℃. | Contact Resistance: ≤60 mΩ MAX | |
| NH3 Gas | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: ≤60 mΩ MAX | |
| Solderability | Soldering Time: 2±0.5 sec. Soldering Temperature: 245±5℃ (0.2 mm from terminal tip) | Solder Wetting: ≥95% area | |
| Resistance to Soldering Heat | Soldering Time: 30±5 sec. Soldering Temperature: 245±5℃ (in hot air oven) | Appearance: No Damage, Deformation | |
| Product Name and Part Number | |||
| Product Name | FFC/FPC Flat Cable Connector | ||
| Part Number | HX 0.5-6PQFHY-H2.0 | ||
| Ratings | |||
| Rated Voltage (MAX) | 50V [AC/DC (virtual value) 50Hz] | ||
| Rated Current (MAX) | 0.5A | ||
| Ambient Temperature Range | -25℃+85℃ | ||
| Product Shape, Dimensions and Materials | |||
| Main body | LCP UL 94V-0 | ||
| Housing Lock | LCP UL 94V-0 | ||
| Terminal | Phosphor Bronze | Surface plated gold | |
| Contact | Phosphor Bronze | Surface plated gold | |
2509281511_hanxia-HX-0-5-6PQFHY-H2-0_C5142049.pdf
Send RFQ
Stock:
MOQ:
