Flexible Flat Cable Connector hanxia HX0.5-38P CTSJ-H2.0 119 0.5mm Pitch FPC FFC Electrical Connector
Manufacturer:
hanxia
Description:
FFC/FPC Connector 38 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
38P
Pitch:
0.5mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX0.5-38P CTSJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX0.5-38P CTSJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors. Designed for flexible flat cable connections, these connectors offer reliable electrical and mechanical performance.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd
- Origin: China
- Material (Main Body/Housing Lock): LCP UL 94V-0
- Material (Terminal/Contact): Phosphor Bronze (Tin plated)
Technical Specifications
| Item | Specification | Test Condition | Requirement |
| Ratings | |||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V | |
| Rated Current (MAX) | 0.4A | ||
| Ambient Temperature Range | -25+85 | ||
| Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. | No Breakdown | |
| Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN | |
| Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX | |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX | |
| Vibration | DC 1mA energized state; vibration along X, Y, Z axes; Amplitude 1.5mm; Frequency 10-55-10Hz/min; Duration 2 hours | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. | Appearance: No Damage |
| Shock | DC 1mA energized state; 490m/s2{50G} impact, 3 strokes in each X.Y.Z. axes. | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. | Appearance: No Damage |
| Heat Resistance | 852, 96 hours | Contact Resistance: 60 m MAX | Appearance: No Damage |
| Cold Resistance | -402, 96 hours | Contact Resistance: 60 m MAX | Appearance: No Damage |
| Humidity | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours | Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Appearance: No Damage |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes b) 852 30 minutes | Contact Resistance: 60 m MAX | Appearance: No Damage |
| Salt Spray | 24 4 hours exposure to a salt spray from the 51% solution at 352. | Contact Resistance: 60 m MAX | Appearance: No Damage, Corrosion |
| SO2 Gas | 24 hours exposure to 505ppm. SO2 gas at 402. | Contact Resistance: 60 m MAX | |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX | Appearance: No Damage |
| Solder ability | Soldering Time: 20.5 sec. Soldering Temperature: 2455 0.2 mm from terminal tip | Solder Wetting: 95% or more | |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455 | Appearance: No Damage, Deformation | |
2509281512_hanxia-HX0-5-38P-CTSJ-H2-0-119_C5691125.pdf
Send RFQ
Stock:
MOQ:
