flexible flat cable connector hanxia HX 1.0-10P CTXJ-H2.5 with rated voltage 50 volts and current 0.5 amps
Manufacturer:
hanxia
Description:
FFC/FPC Connector 10 Position 1mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
10P
Pitch:
1mm
Current Rating:
500mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX 1.0-10P CTXJ-H2.5
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
HX 1.0-10P CTXJ-H2.5
Introduction
Product Overview
This specification covers the 1.0mm Pitch FPC/FFC Connectors (Part No: CTXJ-H2.5) from Shenzhen Hanxia Electronic Co., Ltd. Designed for flexible flat cable connections, these connectors offer reliable electrical and mechanical performance.
Product Attributes
- Brand: HX
- Origin: Shenzhen, China
- Material: LCP (UL 94V-0) for Main body and Housing Lock, Phosphor Bronze for Terminal and Contact. Metal surface plated with tin.
Technical Specifications
| Item | Specification/Requirement | Test Condition |
| Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC (Virtual value) 50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25 ~ +85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (virtual value) for 1 minute between adjacent terminals or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at the speed rate of 253mm/minute. |
| Terminal/Housing Retention Force | 0.25N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | DC 1mA energized; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X, Y, Z axes. |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX | 490m/s {50G}, 3 strokes in each X, Y, Z axes (DC 1mA energized). |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 852, 96 hours, then return to room temperature for 1-2 hours (mate applicable FPC/FFC). |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | -402, 96 hours, then return to room temperature for 1-2 hours (mate applicable FPC/FFC). |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MIN Insulation Resistance: 20 M MIN Dielectric Strength: Must meet 4.1.3 | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours, then measure within 0.5 hours at room temperature (mate applicable FPC/FFC). |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 for 30 minutes; b) 852 for 30 minutes; with 10-15 minutes at normal temperature and humidity between cycles (mate applicable FPC/FFC). |
| Salt Spray | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX | 244 hours exposure to a salt spray from a 51% solution at 352. After test, wash with room temperature water and dry at room temperature (mate applicable FPC/FFC). |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 50 5ppm SO2 gas at 402 (mate applicable FPC/FFC). |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution (mate applicable FPC/FFC). |
| Solderability | Solder Wetting: 95% or more | Soldering Time: 20.5 sec; Soldering Temperature: 2455; 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 305 sec; Soldering Temperature: 2455; at least 5 times in a 2455 hot air oven. |
2411220032_hanxia-HX-1-0-10P-CTXJ-H2-5_C41418903.pdf
Send RFQ
Stock:
MOQ:
