Flexible Flat Cable Connector hanxia HX 0.5-6PINQFHY-H2.0 0.5mm Pitch FPC FFC Connector with Locking
Manufacturer:
hanxia
Description:
FFC/FPC Connector 6 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
6P
Pitch:
0.5mm
Current Rating:
500mA
Voltage Rating (Max):
50V
Contact Type:
双侧触点/上下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
金
Contact Material:
磷青铜
Mfr. Part #:
HX 0.5-6PINQFHY-H2.0
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX 0.5-6PINQFHY-H2.0
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors (Series Locking). These connectors are designed for flexible flat cable applications, offering a reliable locking mechanism.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd
- Origin: China
- Certifications: UL 94V-0 (for LCP material)
Technical Specifications
| Item | Specification | Requirement |
| 3. RATINGS | ||
| Rated Voltage (MAX) | 50V [AC/DC(Virtual value)50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient temperature Range | -25+85 | |
| 4. PERFORMANCE | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500MMIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (0.3mm thick FFC) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal /Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA under energized state; Vibration along XYZ three directions; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes. | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. |
| Shock | DC 1mA under energized state; 490m/s2{50G}, 3 strokes in each X.Y.Z. axes. | Discontinuity: 1 ms MAX. |
| Heat Resistance | Mate applicable FPC/FFC; Placed in 852 air for 96 hours; then return to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX |
| Cold Resistance | Mate applicable FPC/FFC; Placed in -402 air for 96 hours; then return to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX |
| Humidity | Mate applicable FPC/FFC; Placed in 402, 90-95% RH air for 96 hours; measured within 0.5 hours after returning to room temperature. | Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | Mate applicable FPC/FFC; 5 cycles of: a) -553 30 minutes b) 852 30 minutes | Contact Resistance: 60 m MAX |
| Salt Spray | Mate applicable FPC/FFC; 24 4 hours exposure to a salt spray from the 51% solution at 352. | Contact Resistance: 60 m MAX |
| SO2 Gas | Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX |
| Solder ability | Soldering Time: 20.5 sec. Soldering Temperature: 2455. 0.2 mm from terminal tip. | Solder Wetting: 95% or more |
| Resistance to Soldering heat | Soldering Time: 305 sec. Soldering Temperature: 2455. At least 5 times. | No Damage, Deformation |
| 5. PRODUCT SHAPE, DIMENSIONS AND MATERIALS | ||
| Main body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal/Contact | Phosphor Bronze (Surface plated with gold) | |
2509281513_hanxia-HX-0-5-6PINQFHY-H2-0_C19269980.pdf
Send RFQ
Stock:
MOQ:
