0.5mm pitch flat cable connector Hanxia HX0.5-30P XJH2.0 043 for FPC FFC flexible cable applications
Manufacturer:
hanxia
Description:
FFC/FPC Connector 30 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
30P
Pitch:
0.5mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX0.5-30P XJH2.0 043
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX0.5-30P XJH2.0 043
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors from Shenzhen Hanxia Electronic Co., Ltd. These connectors are designed for flexible flat cable applications.
Product Attributes
- Brand: Hanxia Electronic
- Origin: Shenzhen, China
- Product Name: FFC/FPC Flat Cable Connector
- Part Number: HX0.5-30P XJH2.0 043
- Material Code: FPC
Technical Specifications
| Item | Test Condition | Requirement |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V |
| Rated Current (MAX) | 0.4A | |
| Ambient temperature Range | -25+85 | |
| Performance | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500MMIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of positions) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA under energized state; Vibration along XYZ axes; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes. | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. Appearance: No Damage |
| Shock | DC 1mA under energized state; 490m/s{50G}, 3 strokes in each X.Y.Z. axes. | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. Appearance: No Damage |
| Heat Resistance | 852, 96 hours; then return to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX Appearance: No Damage |
| Cold Resistance | -402, 96 hours; then return to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX Appearance: No Damage |
| Humidity | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours; then measure within 0.5 hours at room temperature. | Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN Appearance: No Damage |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes b) 852 30 minutes (with 10-15 min at ambient temp/humidity between cycles) | Contact Resistance: 60 m MAX Appearance: No Damage |
| Salt Spray | 244 hours exposure to a salt spray from the 51% solution at 352. | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion |
| SO2 Gas | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX Appearance: No Damage |
| Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2455 0.2 mm from terminal tip | Solder Wetting: 95% above |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455 At least 5 times. | Appearance: No Damage, Deformation |
Product Shape, Dimensions and Materials
| Name | Materials |
|---|---|
| Main body | LCP UL 94V-0 |
| Housing Lock | LCP UL 94V-0 |
| Terminal | Phosphor Bronze |
| Contact | Phosphor Bronze |
| Remark | Metal surface plated tin |
2509281512_hanxia-HX0-5-30P-XJH2-0-043_C5691106.pdf
Send RFQ
Stock:
MOQ:
