0.5mm Pitch FPC FFC Connector hanxia HX0.5-10P CTXJ-H2.0 119 with Electrical Mechanical Performance
Manufacturer:
hanxia
Description:
FFC/FPC Connector 10 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
10P
Pitch:
0.5mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX0.5-10P CTXJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX0.5-10P CTXJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors, designed for flexible flat cable applications. The product offers reliable electrical and mechanical performance under various environmental conditions.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd
- Origin: Shenzhen, China
- Certifications: UL 94V-0 (for LCP material)
Technical Specifications
| Item | Specification | Condition | Requirement |
| 3. RATINGS | |||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V | |
| Rated Current (MAX) | 0.4A | ||
| Ambient temperature Range | -25+85 | ||
| 4. PERFORMANCE | |||
| 4.1 Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n = number of contacts) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN | |
| 4.3 Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Contact Resistance | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX | |
| Vibration | Contact Resistance | DC 1mA under energized state; Vibration along XYZ three axes; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes | 60 m MAX |
| Discontinuity | 1 ms MAX | ||
| Shock | Appearance | DC 1mA under energized state; 490m/s2 {50G}, 3 strokes in each X.Y.Z. axes. | No Damage |
| Discontinuity | 1 ms MAX | ||
| Heat Resistance | Appearance | 852, 96 hours; then return to room temperature for 1-2 hours | No Damage |
| Contact Resistance | 60 m MAX | ||
| Cold Resistance | Appearance | -402, 96 hours; then return to room temperature for 1-2 hours | No Damage |
| Contact Resistance | 60 m MAX | ||
| Humidity | Appearance | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours; then measure within 0.5 hours after returning to room temperature. | No Damage |
| Contact Resistance | 60 m MAX | ||
| Insulation Resistance | 20 M MIN | ||
| Dielectric Strength | Must meet 4.1.3 | ||
| Temperature Cycling | Appearance | 5 cycles of: a) -553 30 minutes b) 852 30 minutes | No Damage |
| Contact Resistance | 60 m MAX | ||
| Salt Spray | Appearance | 24 4 hours exposure to a salt spray from the 51% solution at 352. | No Damage, Corrosion |
| Contact Resistance | 60 m MAX | ||
| SO2 Gas | Contact Resistance | 24 hours exposure to 505ppm SO2 gas at 402. | 60 m MAX |
| NH3 Gas | Appearance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution | No Damage |
| Contact Resistance | 60 m MAX | ||
| Solder ability | Solder Wetting | Soldering Time: 20.5 sec. Soldering Temperature: 2455. 0.2 mm from terminal tip. | 95% coverage |
| Resistance to Soldering Heat | Appearance | Soldering Time: 305 sec. Soldering Temperature: 2455. At least 5 times. | No Damage, Deformation |
| 5. PRODUCT SHAPE, DIMENSIONS AND MATERIALS (Refer to the drawing) | |||
| Name | Materials | Remark | |
| Main body | LCP UL 94V-0 | ||
| Housing Lock | LCP UL 94V-0 | ||
| Terminal Sit uip | Phosphor Bronze | Metal surface plated with tin | |
| Contact | Phosphor Bronze | Metal surface plated with tin | |
2509281512_hanxia-HX0-5-10P-CTXJ-H2-0-119_C5691135.pdf
Send RFQ
Stock:
MOQ:
