0.5mm Pitch Flexible Flat Cable Connector Hanxia HX0.5-14P CTXJ-H2.0 119 for Electronic Connections
Manufacturer:
hanxia
Description:
FFC/FPC Connector 14 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
14P
Pitch:
0.5mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX0.5-14P CTXJ-H2.0 119
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX0.5-14P CTXJ-H2.0 119
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors manufactured by Shenzhen Hanxia Electronic Co., Ltd. These connectors are designed for flexible flat cable applications.
Product Attributes
- Brand: Hanxia Electronic ()
- Origin: Shenzhen, China
- Certifications: UL 94V-0 (for LCP material)
- Materials: Main body: LCP UL 94V-0; Housing Lock: LCP UL 94V-0; Terminal/Contact: Phosphor Bronze (plated with tin)
Technical Specifications
| Item | Specification | Requirement |
| 3. RATINGS | ||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V |
| Rated Current (MAX) | 0.4A | |
| Ambient temperature Range | -25+85 | |
| 4. PERFORMANCE | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500MMIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1minute between adjacent terminal or ground. | No Breakdown |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n = number of positions) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal /Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 3.92N MIN |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA under energized state; vibrate along XYZ three directions; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes. | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. |
| Shock | DC 1mA under energized state; 6 directions perpendicular to the mating axis; 490m/s2{50G}; 3 strokes each. | Appearance: No Damage Discontinuity: 1 ms MAX. |
| Heat Resistance | Mate applicable FPC/FFC; place in 852 air for 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | Mate applicable FPC/FFC; place in -402 air for 96 hours; then return to room temperature for 1-2 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity | Mate applicable FPC/FFC; place in 402, 90-95% RH air for 96 hours; then measure within 0.5 hours after returning to room temperature. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | Mate applicable FPC/FFC; 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at room temperature and humidity between cycles. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | Mate applicable FPC/FFC; 24 4 hours exposure to a salt spray from the 51% solution at 352. Wash with room temperature water after test; then dry at room temperature. | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX |
| SO2 Gas | Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Solderability | Dip 0.2 mm from terminal tip into 2455 tin bath for 20.5 sec. | Solder Wetting: 95% coverage area |
| Resistance to Soldering Heat | Subjected to 305 sec in a 2455 hot air oven, at least 5 times. | Appearance: No Damage, Deformation |
2509281512_hanxia-HX0-5-14P-CTXJ-H2-0-119_C5691138.pdf
Send RFQ
Stock:
MOQ:
