0.5mm pitch FPC connector hanxia HX0.5-12P XJH2.0 043 for flexible flat cable electronic applications
Manufacturer:
hanxia
Description:
FFC/FPC Connector 12 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
12P
Pitch:
0.5mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX0.5-12P XJH2.0 043
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX0.5-12P XJH2.0 043
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors (HX0.5-12P XJH2.0 043) from Shenzhen Hanxia Electronic Co., Ltd. These connectors are designed for flexible flat cable applications.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd.
- Origin: Shenzhen, China
- Model: HX0.5-12P XJH2.0 043
- Material Code: FPC
- Certifications: UL 94V-0 (for LCP materials)
Technical Specifications
| Item | Specification/Requirement | Test Condition | Requirement |
| [3] RATINGS | |||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz 50V | ||
| Rated Current (MAX) | 0.4A | ||
| Ambient Temperature Range | -25+85 | ||
| [4] PERFORMANCE | |||
| 4.1 Electrical Performance | |||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thick) at a speed rate of 253mm/minute. 'n' refers to the number of positions. | |
| Terminal / Housing Retention Force | 3.92N MIN | Pull the terminal at a speed rate of 25 3mm per minute. | |
| 4.3 Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute. | |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). | |
| Vibration | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | DC 1mA under energized state. Vibration along XYZ axes, Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each axis. | |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX | DC 1mA under energized state. 490m/s {50G}, 3 strokes in each X.Y.Z. axes. | |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Mate applicable FPC/FFC, place in 852 air for 96 hours, then return to room temperature for 1-2 hours. | |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Mate applicable FPC/FFC, place in -402 air for 96 hours, then return to room temperature for 1-2 hours. | |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours. Measure within 0.5 hours after returning to room temperature. | |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 for 30 minutes, b) 852 for 30 minutes, with 10-15 minutes at room temperature between cycles. | |
| Salt Spray | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX | 24 4 hours exposure to a salt spray from a 51% solution at 352. Wash with room temperature water after test and dry at room temperature. | |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. | |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | |
| Solder ability | Solder Wetting: 95% | Soldering Time: 20.5 sec. Soldering Temperature: 2455 0.2 mm from terminal tip. | |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455 At least 5 times. | |
| [5] PRODUCT SHAPE, DIMENSIONS AND MATERIALS (Refer to drawing) | |||
| NAME | MATERIALS | ||
| Main body | LCP UL 94V-0 | ||
| Housing Lock | LCP UL 94V-0 | ||
| Terminal | Phosphor Bronze | ||
| Contact | Phosphor Bronze | ||
| Remark | Metal surface plated with tin | ||
2509281512_hanxia-HX0-5-12P-XJH2-0-043_C5691102.pdf
Send RFQ
Stock:
MOQ:
