1.0mm Pitch FPC FFC Connector Hanxia HX 1.0-6P CTSJ-H2.5 with LCP UL 94V-0 Housing and Lock Mechanism
Manufacturer:
hanxia
Description:
FFC/FPC Connector 6 Position 1mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
6P
Pitch:
1mm
Current Rating:
500mA
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX 1.0-6P CTSJ-H2.5
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
HX 1.0-6P CTSJ-H2.5
Introduction
Product Overview
This specification covers the 1.0mm Pitch FPC/FFC Connectors, designed for flexible flat cable applications. The product offers reliable electrical, mechanical, and environmental performance.
Product Attributes
- Brand: Hanxia Electronic
- Origin: Shenzhen, China
- Certifications: UL 94V-0 (for LCP material)
- Material: Main body: LCP (UL 94V-0); Housing Lock: LCP (UL 94V-0); Terminal/Contact: Phosphor Bronze (Tin plated)
Technical Specifications
| Item | Specification | Requirement |
| [3] RATINGS | ||
| Rated Voltage (MAX) | 50V [AC/DC (effective value 50Hz)] | |
| Rated Current (MAX) | 0.5A | |
| Ambient temperature Range | -25~ +85 | |
| [4] PERFORMANCE | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 250V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking: 1.96*n (N) MAX; Withdrawal: 0.49*n (N) MIN |
| Terminal / Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 0.25N MIN |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA under energized state; vibration along XYZ three axes; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX. |
| Shock | DC 1mA under energized state; 490m/s {50G} shock in each of the 6 mutually perpendicular directions; 3 strokes each | Appearance: No Damage; Discontinuity: 1 ms MAX. |
| Heat Resistance | Mate applicable FPC/FFC; placed in 852 air for 96 hours; then returned to room temperature for 1-2 hours. | Appearance: No Damage; Contact Resistance: 60 m MAX |
| Cold Resistance | Mate applicable FPC/FFC; placed in -402 air for 96 hours; then returned to room temperature for 1-2 hours. | Appearance: No Damage; Contact Resistance: 60 m MAX |
| Humidity | Mate applicable FPC/FFC; placed in 402, 90-95% RH air for 96 hours; measured within 0.5 hours after returning to room temperature. | Appearance: No Damage; Contact Resistance: 60 m MAX; Dielectric Strength: Must meet 4.1.3; Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes b) 852 30 minutes | Appearance: No Damage; Contact Resistance: 60 m MAX |
| Salt Spray | Mate applicable FPC/FFC; 244 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temperature water and dry at room temperature. | Appearance: No Damage, Corrosion; Contact Resistance: 60 m MAX |
| SO2 Gas | Mate applicable FPC/FFC; 24 hours exposure to 50 5ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage; Contact Resistance: 60 m MAX |
| Solder ability | Soldering Time: 20.5 sec. Soldering Temperature: 2455. 0.2 mm from terminal tip. | Solder Wetting: 95% or more wetting area. |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455. At least 5 times under these conditions in a 2455 hot air oven. | Appearance: No Damage, Deformation |
2411220032_hanxia-HX-1-0-6P-CTSJ-H2-5_C41418897.pdf
Send RFQ
Stock:
MOQ:
