Flexible Flat Cable Connector Hanxia HX 0.5-24P XGXJ-H2.0 0.5mm Pitch FPC FFC Connector with Locking
Manufacturer:
hanxia
Description:
FFC/FPC Connector 24 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
24P
Pitch:
0.5mm
Current Rating:
400mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX 0.5-24P XGXJ-H2.0
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
HX 0.5-24P XGXJ-H2.0
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors with a locking mechanism. Designed for flexible flat cable connections, these connectors offer reliable electrical and mechanical performance.
Product Attributes
- Brand: Hanxia Electronic ()
- Origin: Shenzhen, China
- Certifications: UL 94V-0 (for LCP material)
Technical Specifications
| Item | Requirement | Test Condition |
| Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC(Virtual value)50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | ≤20 mΩ MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500MΩ MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Applicable for 0.3mm thick FFC; Insert and extract at a speed of 25±3mm/minute. (n=number of contacts) |
| Terminal /Housing Retention Force | 3.92N MIN | Pull the terminal at a speed of 25 ± 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 mΩ MAX | Insertion and withdrawal actuator up to 20 cycles at a speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 ℃ MAX | Carrying rated current load (UL 498). |
| Vibration | Contact Resistance: 60 mΩ MAX Discontinuity: 1 ms MAX. Appearance: No Damage | Vibration: 10-55-10Hz/min; Duration: 2 hours in each X, Y, Z axes. Amplitude: 1.5mm P-P. (DC 1mA energized) |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX. | 490m/s²{50G}, 3 strokes in each X, Y, Z axes. (DC 1mA energized) |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 mΩ MAX | 85±2℃, 96 hours. (Mate applicable FPC/FFC) |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 mΩ MAX | -40±2℃, 96 hours. (Mate applicable FPC/FFC) |
| Humidity | Appearance: No Damage Contact Resistance: 60 mΩ MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 MΩ MIN | Temperature: 40±2℃, Relative Humidity: 90-95%, Duration: 96 Hours. (Mate applicable FPC/FFC) |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 mΩ MAX | 5 cycles of: a) -55±3℃ 30 minutes b) 85±2℃ 30 minutes. (Mate applicable FPC/FFC) |
| Salt Spray | Appearance: No Damage, Corrosion Contact Resistance: 60 mΩ MAX | 24 ± 4 hours exposure to a salt spray from the 5±1% solution at 35±2℃. |
| SO2 Gas | Contact Resistance: 60 mΩ MAX | 24 hours exposure to 50±5ppm SO2 gas at 40±2℃. (Mate applicable FPC/FFC) |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60 mΩ MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. (Mate applicable FPC/FFC) |
| Solder ability | Solder Wetting: 95% or more coverage | Soldering Time: 2±0.5 sec. Soldering Temperature: 245±5℃ at 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 30±5 sec. Soldering Temperature: 245±5℃ (Hot air, at least 5 times). |
| Product Shape, Dimensions and Materials | ||
| Main body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal/Contact | Phosphor Bronze | Metal surface plated with tin. |
2509281511_hanxia-HX-0-5-24P-XGXJ-H2-0_C5142050.pdf
Send RFQ
Stock:
MOQ:
