Flat Flexible Cable Connector Hanxia HX FPC 0.5-4P LTH2.0 0.5mm Pitch FPC Connector for Electronics
Manufacturer:
hanxia
Description:
FFC/FPC Connector 4 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
4P
Pitch:
0.5mm
Current Rating:
500mA
Voltage Rating (Max):
50V
Contact Type:
单侧触点/垂直
Mounting Type:
立贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX FPC 0.5-4P LTH2.0
Package:
SMD,P=0.5mm
Model Number:
HX FPC 0.5-4P LTH2.0
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors. It details the electrical, mechanical, and environmental performance characteristics of the FFC/FPC Flat Cable Connector, designed for various applications requiring reliable connection of flexible flat cables.
Product Attributes
- Brand: HX FPC
- Origin: Shenzhen Hanxia Electronic Co., Ltd
- Part Number: FPC HX FPC 0.5-4P LTH2.0
- Certifications: UL 94V-0 (for LCP material)
Technical Specifications
| Item | Requirement | Test Condition | Specification |
| 3. RATINGS | |||
| Rated Voltage (MAX) | 50V [AC/DC(Virtual value)50Hz] | ||
| Rated Current (MAX) | 0.5A | ||
| Ambient temperature Range | -25+85 | ||
| 4. PERFORMANCE | |||
| 4.1 Electrical Performance | |||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of contacts) | |
| Terminal /Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 25 3mm per minute. | |
| 4.3 Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) | |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes DC 1mA energized state. | Appearance: No Damage |
| Shock | Discontinuity: 1 ms MAX | 490m/s2{50G}, 3 strokes in each X.Y.Z. axes. DC 1mA energized state. | Appearance: No Damage |
| Heat Resistance | Contact Resistance: 60 m MAX | 852, 96 hours exposure, then return to room temperature for 1-2 hours. Applicable FPC/FFC mated. | Appearance: No Damage |
| Cold Resistance | Contact Resistance: 60 m MAX | -402, 96 hours exposure, then return to room temperature for 1-2 hours. Applicable FPC/FFC mated. | Appearance: No Damage |
| Humidity | Contact Resistance: 60 m MAX Insulation Resistance: 20 M MIN Dielectric Strength: Must meet 4.1.3 | Temperature: 402 Relative Humidity: 90-95% Duration: 96 Hours Measurement within 0.5 hours after returning to room temperature. Applicable FPC/FFC mated. | Appearance: No Damage |
| Temperature Cycling | Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes b) 852 30 minutes Intermediate dwell at room temp for 10-15 minutes. Applicable FPC/FFC mated. | Appearance: No Damage |
| Salt Spray | Contact Resistance: 60 m MAX | 48 4 hours exposure to a salt spray from the 51% solution at 352. Post-test rinse with room temperature water and dry. Applicable FPC/FFC mated. | Appearance: No Damage, Corrosion |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. Applicable FPC/FFC mated. | |
| NH3 Gas | Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. Applicable FPC/FFC mated. | Appearance: No Damage |
| Solder Ability | Solder Wetting: 95% | Soldering Time: 20.5 sec. Soldering Temperature: 2455 0.2 mm from terminal tip. | |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455 Performed in hot air at 2455 for at least 5 times. | Appearance: No Damage, Deformation | |
| 5. PRODUCT SHAPE, DIMENSIONS AND MATERIALS (Refer to the drawing) | |||
| NAME | MATERIALS | REMARK | |
| Main body | LCP UL 94V-0 | ||
| Housing Lock | LCP UL 94V-0 | ||
| Terminal | Phosphor Bronze | Metal surface plated with tin | |
| Contact | Phosphor Bronze | ||
2410121337_hanxia-HX-FPC-0-5-4P-LTH2-0_C7430261.pdf
Send RFQ
Stock:
MOQ:
