1.0 Millimeter Pitch FPC FFC Connector Hanxia HX 1.0-10P CTSJ-H2.5 Suitable for Flexible Flat Cable
Manufacturer:
hanxia
Description:
FFC/FPC Connector 10 Position 1mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-25℃~+85℃
Locking Feature:
抽屉式
Number Of Contacts:
10P
Pitch:
1mm
Current Rating:
500mA
Voltage Rating (Max):
50V
Contact Type:
上接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX 1.0-10P CTSJ-H2.5
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
HX 1.0-10P CTSJ-H2.5
Introduction
Product Overview
This specification covers the 1.0mm Pitch FPC/FFC Connectors, designed for flexible flat cable applications. They offer reliable electrical and mechanical performance for various electronic devices.
Product Attributes
- Brand: Hanxia Electronic
- Origin: Shenzhen, China
- Certifications: UL 94V-0 (for LCP material)
Technical Specifications
| Item | Specification | Requirement | |
| Ratings | |||
| Rated Voltage (MAX) | 50V [AC/DC(Virtual value)50Hz] | ||
| Rated Current (MAX) | 0.5A | ||
| Ambient temperature Range | -25~ +85 | ||
| Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 250V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | |
| Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking: 1.96*n (N) MAX | |
| Withdrawal: 0.49*n (N) MIN | |||
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 0.25N MIN | |
| Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX | |
| Appearance: No Damage | |||
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX | |
| Vibration | DC 1mA energized state; vibration along X, Y, Z axes; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each axis. | Contact Resistance: 60 m MAX | |
| Discontinuity: 1 ms MAX. | |||
| Shock | DC 1mA energized state; 490m/s2{50G}, 3 strokes in each of the 6 directions. | Appearance: No Damage | |
| Discontinuity: 1 ms MAX. | |||
| Heat Resistance | Mate applicable FPC/FFC; placed in 852 air for 96 hours; then returned to room temperature for 1-2 hours. | Appearance: No Damage | |
| Contact Resistance: 60 m MAX | |||
| Cold Resistance | Mate applicable FPC/FFC; placed in -402 air for 96 hours; then returned to room temperature for 1-2 hours. | Appearance: No Damage | |
| Contact Resistance: 60 m MAX | |||
| Humidity | Mate applicable FPC/FFC; placed in 402, 90-95% RH air for 96 hours; then measured within 0.5 hours at room temperature. | Appearance: No Damage | |
| Contact Resistance: 60 m MAX | |||
| Dielectric Strength: Must meet 4.1.3 | Insulation Resistance: 20 M MIN | ||
| Temperature Cycling | 5 cycles of: a) -553 30 minutes b) 852 30 minutes; followed by 10-15 minutes at normal temperature and humidity. | Appearance: No Damage | |
| Contact Resistance: 60 m MAX | |||
| Salt Spray | Mate applicable FPC/FFC; 244 hours exposure to a salt spray from a 51% solution at 352; washed with room temperature water after test; then dried at room temperature. | Appearance: No Damage, Corrosion | |
| Contact Resistance: 60 m MAX | |||
| SO2 Gas Resistance | Mate applicable FPC/FFC; 24 hours exposure to 50 5ppm SO2 gas at 402. | Contact Resistance: 60 m MAX | |
| NH3 Gas Resistance | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage | |
| Contact Resistance: 60 m MAX | |||
| Solder ability | Terminal tip immersed in a 2455 tin bath for 20.5 sec, 0.2 mm from terminal tip. | Solder Wetting: 95% or more | |
| Soldering Time: 20.5 sec. Soldering Temperature: 2455 | |||
| Resistance to Soldering Heat | 305 sec. Soldering Temperature: 2455, at least 5 times in a 2455 hot air oven. | Appearance: No Damage, Deformation | |
| Product Shape, Dimensions and Materials | |||
| Name | Material | Remark | |
| Main body | LCP UL 94V-0 | ||
| Housing Lock | LCP UL 94V-0 | ||
| Terminal | Phosphor Bronze | Metal surface plated with tin | |
| Contact | Phosphor Bronze | Metal surface plated with tin | |
2411220032_hanxia-HX-1-0-10P-CTSJ-H2-5_C41418899.pdf
Send RFQ
Stock:
MOQ:
