contact resistance hanxia HX FPC 0.5-6P LTH2.0 0.5 millimeter pitch FPC connector for stable signals
Manufacturer:
hanxia
Description:
FFC/FPC Connector 6 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
6P
Pitch:
0.5mm
Current Rating:
500mA
Voltage Rating (Max):
50V
Contact Type:
单侧触点/垂直
Mounting Type:
立贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
磷青铜
Mfr. Part #:
HX FPC 0.5-6P LTH2.0
Package:
SMD,P=0.5mm
Model Number:
HX FPC 0.5-6P LTH2.0
Introduction
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors, designed for various electronic applications. The product features reliable electrical and mechanical performance, ensuring stable connections under different environmental conditions.
Product Attributes
- Brand: HX FPC
- Manufacturer: Shenzhen Hanxia Electronic Co., Ltd
- Model: LTH2.0
- Certifications: UL 94V-0 (for LCP material)
Technical Specifications
| Item | Specification | Requirement |
| Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC(Virtual value)50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient temperature Range | -25+85 | |
| Performance | ||
| Electrical Performance | Contact Resistance | 30 m MAX (Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA) |
| Insulation Resistance | 500M MIN (Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground) | |
| Dielectric Strength | No Breakdown (Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground) | |
| Mechanical Performance | Locking and Withdrawal Force | Locking: 1.96*n (N) MAX; Withdrawal: 0.49*n (N) MIN (Insert and extract applicable FFC at the speed rate of 253mm/minute) |
| Terminal /Housing Retention Force | 3.92N MIN (Pull the terminal at the speed rate of 25 3mm per minute) | |
| Environmental Performance and Others | Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX (Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute) |
| Temperature Rise | 30 MAX (Carrying rated current load, UL 498) | |
| Vibration | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX (DC 1mA under vibration: 10-55-10Hz/min, Amplitude: 1.5mm P-P, Duration: 2 hours in each X.Y.Z. axes) | |
| Shock | Appearance: No Damage; Discontinuity: 1 ms MAX (490m/s{50G}, 3 strokes in each X.Y.Z. axes, DC 1mA) | |
| Heat Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX (852, 96 hours) | |
| Cold Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX (-402, 96 hours) | |
| Humidity | Appearance: No Damage; Contact Resistance: 60 m MIN; Dielectric Strength: Must meet 4.1.3; Insulation Resistance: 20 M MIN (402, Relative Humidity: 90-95%, Duration: 96 Hours) | |
| Temperature Cycling | Appearance: No Damage; Contact Resistance: 60 m MAX (5 cycles of: -553 30 minutes, 852 30 minutes) | |
| Salt Spray | Appearance: No Damage, Corrosion; Contact Resistance: 60 m MAX (48 4 hours exposure to a salt spray from the 51% solution at 352) | |
| SO2 Gas | Contact Resistance: 60 m MAX (24 hours exposure to 505ppm SO2 gas at 402) | |
| NH3 Gas | Appearance: No Damage; Contact Resistance: 60 m MAX (40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution) | |
| Solder ability | Solder Wetting: 95% wetting area (Soldering Time: 20.5 sec, Soldering Temperature: 2455, 0.2 mm from terminal tip) | |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation (Soldering Time: 305 sec, Soldering Temperature: 2455, at least 5 times) | |
| Product Shape, Dimensions and Materials | ||
| Main body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal/Contact | Phosphor Bronze (Surface plated tin) | |
2410121337_hanxia-HX-FPC-0-5-6P-LTH2-0_C7430262.pdf
Send RFQ
Stock:
MOQ:
