6.20 millimeter pitch double row connector strip HCTL HC VL 4S 05 inspection and product performance
Manufacturer:
HCTL
Description:
4 Through Hole,P=6.2mm Circular Connector Accessories RoHS
Category:
Circular Connector Accessories/Circular Connector Accessories
Specifications
Reference Series:
VL
Number Of PINs:
4
Type:
固定器
Mfr. Part #:
HC-VL-4S-05
Package:
Through Hole,P=6.2mm
Model Number:
HC-VL-4S-05
Introduction
Product Overview
This specification document outlines the details for the 6.20MM PITCH VL CONNECTOR DOUBLE ROW TYPE, part number HC-VL - ****. It covers product performance, test methods, and inspection requirements, suitable for various electrical applications.
Product Attributes
- Brand: (HCTLDZ)
- Origin: 40B326
- Certifications: UL94V-O (for Housing Plastic)
- Color: Nature (for Housing Plastic)
Technical Specifications
| Item | Description | Requirement | Test Mode | ||
| Scope | The contents of specifications for 6.20 series connector strip including product performance, test methods and inspection requirements. | ||||
| 6.20 | |||||
| This specification document outlines the details for the 6.20 series connector strip, covering product performance, test methods, and inspection requirements. | |||||
| Applicable Standards | GB/T2421 | - | - | ||
| GB/T2423 | - | - | |||
| GB/T2424 | - | - | |||
| GB/T5095 | - | - | |||
| GB/T2423 | - | - | |||
| GB/T2424 | - | - | |||
| GB/T5095 | - | - | |||
| Class 1: General Principles | - | - | |||
| Testing method for Environmental of Electrical Connectors | - | - | |||
| Testing procedure/method for components of electric equipment | - | - | |||
| Use Condition | Ambient temperature Range | -40 105 | - | ||
| -40 +105 | - | ||||
| Applicable Wire Sizes | AWG #1222 | - | |||
| Appearance and Dimension | Appearance | Product surface without defect dirtcrackand mechanical damage, Contact without rust plating not oxides and not peeled | - | ||
| - | |||||
| Dimension | According to drawings | - | |||
| Material | Part No. | Type | Material | Finish | Explain |
| 5.1 | Terminal Contact | 0.25mm | Phosphor bronze | ||
| 5.2 | Terminal Contact | 0.25mm | Phosphor bronze | ||
| 5.3 | Housing Plastic | Nylon66 UL94V- O(2) | - | Color: Nature | |
| Electrical Performance | Item | Rated Voltage | Rated Current | Requirement | Test Mode |
| Contact Resistance | - | - | Initial value 20m | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector. Item No breakdown or flashover. (Does not include wire resistance) | |
| 600V AC/DC | 20A AC/DC | No breakdown or flashover | Apply 2000V AC(rms)for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors. | ||
| Insulation Resistance | - | - | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance. | |
| - | 20A AC/DC | - | - | ||
| Mechanical Performance | Item | Requirement | Test Mode | ||
| Single contact insertion force | 20N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test. | |||
| Single contact Withdrawal force | 4N | The terminal and the hole seat at a react per minute to 253mm along the write direction are pulled out from the hole in the seat capacity. | |||
| Terminal crimping Wire strength | 50N (AWG#12) 40N (AWG#14) 30N (AWG#16) 25N (AWG#18) 20N (AWG#20) 15N (AWG#22) | Terminal crimping wire Axial per minute to 25 3mm rate of the pullout force. | |||
| Fixed terminals And hole seat | 30N | - | |||
| Pin Retention Force | 30N | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit Seat pull-out force. | |||
| Durability | Contact Resistance 40m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test. | |||
| Vibration | Current Discontinuity: 1 sec Max Contact Resistance 40m | Amplitude 1.5mm p-p Direction Axis of up and down, Axis of right the left, Axis of front and back Frequency :10-55-1O Hz/minute Period: 2hour for each direction | |||
| Appearance | No damage | - | |||
| Mate connector combination state of the welding circuit board as test samples the request in accordance with the following specification resistance to vibration test whether to produce discontinuous current determined during the experiment (off) phenomenon after the experiment measuring contact resistance | - | - | |||
| Environmental Performance | Item | Requirement | Test Mode | ||
| Thermal Aging | Appearance: No damage Contact Resistance 40m | Temperature852 Period96 hours continuously | |||
| Constant Humidity | Appearance: No damage Contact Resistance 40m Insulation Resistance 1000 M | Temperature402 C Relative humidity90-95% (RH) Period96 hours continuously | |||
| Temperature Cycling | Appearance: No damage Contact Resistance 40m Insulation Resistance 1000 M Withstand Voltage: No breakdown or flashover | One cycle consists of -403C 30min,room temp 10-15min, then 1053C 30min,room temp 10-15min. Total cycle :5cycle | |||
| Salt Spray | Appearance: No damage Contact Resistance 40m | Temperature : 35 3 C Concentration: 5 1 % Period: 24 hours | |||
2511180917_HCTL-HC-VL-4S-05_C20539187.pdf
Send RFQ
Stock:
MOQ:
