Durable Electrical Connector HCTL HC-VYH-2S-05 6.50MM Pitch Double Row Type for Industrial Equipment
Manufacturer:
HCTL
Description:
2 Through Hole,P=6.5mm Circular Connector Accessories RoHS
Category:
Circular Connector Accessories/Circular Connector Accessories
Specifications
Reference Series:
VYH
Number Of PINs:
2
Type:
固定器
Mfr. Part #:
HC-VYH-2S-05
Package:
Through Hole,P=6.5mm
Model Number:
HC-VYH-2S-05
Introduction
Product Overview
The 6.50MM PITCH VYH CONNECTOR DOUBLE ROW TYPE is a series of strip connectors designed for electrical applications. It offers reliable performance, with specifications covering electrical, mechanical, and environmental characteristics. This connector is suitable for various industrial and electronic equipment.
Product Attributes
- Brand: (HCTLDZ)
- Origin: Shenzhen, China
- Material: Copper Alloy (Terminal Contact), Nylon66 UL94V-O (Housing Plastic), Brass (Contact Pin)
- Color: White
- Certifications: UL94V-O
Technical Specifications
| Item | Requirement | Test Method |
| 3. USE CONDITION | ||
| Ambient temperature | -40 +105 | |
| Applicable Wire Sizes | AWG #1626 | |
| Applicable PC board thickness | 1.6mm | |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact without rust plating, oxides, and peeling. | |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 5. Material Finish | ||
| Terminal Contact | Copper Alloy, 0.25mm thickness, Tin plating: 35 m | |
| Housing Plastic | Nylon66 UL94V-O, Color: White | |
| Contact Pin | Brass, Tin plating: 2.55 m | |
| 6. Electrical Performance | ||
| Rated Voltage | 300V AC/DC | |
| Rated Current | 10A AC/DC | |
| Withstand voltage | 1500V AC(rms) for 1 minute between adjacent contacts, leakage current 0.5mA | Apply 1500V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | Initial value 20m | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector |
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7. Mechanical Performance | ||
| Terminal crimping wire strength | AWG#16: 130N, AWG#18: 90N, AWG#20: 70N, AWG#22: 50N, AWG#24: 30N, AWG#26: 20N | Terminal crimping wire Axial per minute to 25 3mm rate of the pullout force |
| Fixed terminals and hole seat strength | 50N | |
| Seat pull-out force | 20N | The terminal and the hole seat at a react per minute to 25 3mm along the write direction are pulled out from the hole in the seat capacity |
| Pin Retention Force | 20N | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit |
| Contact Withdrawal force | AWG#16: 30N, AWG#18: 20N, AWG#20: 10N, AWG#22: 10N, AWG#24: 10N, AWG#26: 10N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Contact Insertion force | 2N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Vibration | Contact Resistance 40m, Appearance: No damage, Current Discontinuity 1 sec Max | Amplitude: 1.5mm p-p, Frequency: 10-55-10 Hz/minute, Period: 2 hours for each direction (X, Y, Z axis) |
| Durability | Contact Resistance 40m, Appearance: No damage, Current Discontinuity 1 sec Max | 30 cycles (10 cycles/minute) |
| 8. Environmental Characteristics | ||
| Thermal Aging | Contact Resistance 40m, Appearance: No damage | Temperature: 852, Period: 96 hours |
| Temperature Rise | 30 Max | Measure the temperature rise of contact when the maximum rated current is passed |
| Constant Humidity | Contact Resistance 40m, Insulation Resistance 1000m, Appearance: No damage | Temperature: 402, Relative humidity: 90-95%, Period: 96 hours |
| Temperature Cycling | Contact Resistance 40m, Withstand voltage: No breakdown or flashover, Appearance: No damage | One cycle: -553C (30min) to 853C (30min), transition 10-15min. Total 5 cycles. |
| Salt Spray | Contact Resistance 40m, Appearance: No damage | Concentration: 51% NaCl, Temperature: 353, Period: Stamping after tin plated for 8 hours / Stamping before tin plated for 48 hours |
| Solderability | Area of soldering: 90% | Soldering temperature: 2455C, Immersion period: 3 0.5S |
| Resistance to soldering heat (Manual) | Appearance: No damage | Soldering temperature: 3505, Soldering time: 30.5S, Position: 1.5mm from end |
| Resistance to soldering heat (Wave) | Appearance: No damage | Soldering temperature: 2605, Soldering time: 50.5S, Position: 0.5mm from end |
2401121839_HCTL-HC-VYH-2S-05_C20539196.pdf
Send RFQ
Stock:
MOQ:
