Electrical strip connector HCTL HC-VYH-4S-05 compatible with PCB thickness 1.6 millimeters and wire sizes AWG 16 to 26
Manufacturer:
HCTL
Description:
4 Through Hole,P=6.5mm Circular Connector Accessories RoHS
Category:
Circular Connector Accessories/Circular Connector Accessories
Specifications
Reference Series:
VYH
Number Of PINs:
4
Type:
固定器
Mfr. Part #:
HC-VYH-4S-05
Package:
Through Hole,P=6.5mm
Model Number:
HC-VYH-4S-05
Introduction
Product Overview
This specification covers the 6.50 series strip connector, including product performance, test methods, and inspection requirements. It is designed for applications requiring reliable electrical connections.
Product Attributes
- Brand: HCTLDZ
- Origin: 40B726
- Certifications: UL94V-O (for Nylon66)
- Material (Housing): Nylon66
- Material (Contact): Copper Alloy
- Color (Housing): White
- Color (Contact): White
Technical Specifications
| Item | Requirement | Test Method |
| 3. Use Condition | ||
| Ambient temperature | -40 105 | |
| Applicable Wire Sizes | AWG #1626 | |
| Applicable PC board thickness | 1.6mm | |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact without rust plating, oxides, and peeling. | |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 5. Material | ||
| Terminal Contact | (Pin) | Copper Alloy, 0.25mm thickness, Tin plating: 35 m |
| Housing Plastic | (Wafer) | Nylon66 UL94V-O, Color: White |
| Contact Pin | (Pin) | Brass, Tin plating: 2.55 m, Color: White |
| 6. Electrical Performance | ||
| Rated Voltage | 300V AC/DC | |
| Rated Current | 10A AC/DC | |
| Withstand voltage | 1500V AC (rms) for 1 minute between adjacent contacts | No breakdown or flashover |
| Contact Resistance | 20m (Initial value) | Apply 20mV max voltage and 100mA max current to mate connector |
| Insulation Resistance | 1000 M | Apply 500V DC (rms) for 1 minute between adjacent contacts |
| 7. Mechanical Performance | ||
| Contact Insertion Force | 130N (AWG#16) | Mate connectors, 253mm/min |
| Contact Withdrawal Force | 90N (AWG#16) | Mate connectors, 253mm/min |
| Pin Retention Force | 20N | Exerts force on pin end, 253mm/min |
| Seat pull-out force | 20N | Terminal and hole seat pull-out force, 253mm/min |
| Terminal crimping Wire strength | 130N (AWG#16) | Axial pullout force on crimped wire, 253mm/min |
| Vibration | Contact Resistance 40m; Appearance: No damage | Amplitude: 1.5mm p-p, Frequency: 10-55-10 Hz/min, 2 hours per direction (X, Y, Z axes) |
| Durability | Contact Resistance 40m; Appearance: No damage; Current Discontinuity: 1 sec Max | 30 cycles (insert/withdraw), 10 cycles/min max |
| 8. Environmental Performance | ||
| Thermal Aging | Appearance: No damage; Contact Resistance 40m | 852, 96 hours |
| Temperature Rise | 30 Max | Measure contact temperature rise at max rated current |
| Constant Humidity | Appearance: No damage; Contact Resistance 40m; Insulation Resistance 1000M | 90-95% RH, 96 hours at 402 |
| Temperature Cycling | Appearance: No damage; Contact Resistance 40m; Insulation Resistance 1000M; Withstand voltage: No breakdown or flashover | -553 (30min) to 853 (30min), 5 cycles |
| Salt Spray | Appearance: No damage; Contact Resistance 40m | 353, 51% salt solution, 48 hours (stamping after plating) or 8 hours (plating after stamping) |
| Solderability | Area of soldering: 90% | 2455C, 30.5 seconds (immersion) |
| Resistance to soldering heat (Manual) | Appearance: No damage | 3505C, 30.5 seconds |
| Resistance to soldering heat (Wave) | Appearance: No damage | 2605C, 50.5 seconds |
2404091840_HCTL-HC-VYH-4S-05_C20539198.pdf
Send RFQ
Stock:
MOQ:
