electrical connector strip HCTL HC-2510-2A suitable for AWG 24 to 30 wire sizes and 1.6mm PC board thickness
Manufacturer:
HCTL
Description:
Connector Header 2 position 2.54mm Pitch 4A Through Hole -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
5.8mm
Pins Structure:
1x2P
Reference Series:
-
Contact Plating:
锡
Contact Material:
黄铜;PA66
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Supplementary Features:
-
Pitch:
2.54mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
2
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
5.08mm
Z-Height Of The Board:
11.6mm
Row Spacing:
-
Mounting Type:
直插
Mfr. Part #:
HC-2510-2A
Package:
Through Hole,P=2.54mm
Model Number:
HC-2510-2A
Introduction
Product Overview
The 2510 series connector strip is designed for reliable electrical connections, offering specific performance, test methods, and inspection requirements. It is suitable for applications requiring stable electrical and mechanical properties under various environmental conditions.
Product Attributes
- Brand: (Huan Can Tian Lu)
- Origin: (Shenzhen)
- Product Name: 2510 (2510 Series Specification Book)
- Applicable Wire Sizes: AWG#24#30
- Applicable PC Board Thickness: 1.6mm
- Certifications: UL94V-0 (for Housing material)
- RoHS: Compliant
Technical Specifications
| Item | Description | Requirement |
| Electrical Performance | ||
| Rated Current | 4A AC DC | |
| Rated Voltage | 250V AC DC | |
| Contact Resistance | Initial value 20m (Mate connector, 20mV max, 100mA max) | |
| Withstand Voltage | 1000V AC (rms) for 1 minute, leakage current 0.5mA | No breakdown or flashover |
| Insulation Resistance | 1000 M (between adjacent contacts, 500V DC for 1 minute) | |
| Mechanical Performance | ||
| Terminal crimping wire strength | AWG#24: 30N, AWG#26: 20N, AWG#28: 13N, AWG#30: 8N (Axial pullout force at 253mm/min) | |
| Fixed terminals and hole seat | 15N per contact (Axial pullout force at 253mm/min) | |
| Single contact insertion force | 6N (at 253mm/min) | |
| Single contact withdrawal force | 0.6N (at 253mm/min) | |
| Pin Retention force | 15N per contact (at 253mm/min) | |
| Durability | 30 cycles (max 10 cycles/min) | Contact Resistance 30 m |
| Vibration | Frequency: 10-55-10 Hz/min, Amplitude: 1.5mm p-p, 2 hours per axis (X, Y, Z) | Appearance: No damage, Contact Resistance 30 m, Current Discontinuity: 1sec Max |
| Environmental Performance | ||
| Thermal Aging | 852, 96 hours continuously | Appearance: No damage, Contact Resistance 30 m |
| Temperature Rise | Under max rated current | 30 Max |
| Humidity | 402, 90-95%RH, 96 hours continuously | Appearance: No damage, Contact Resistance 30m, Insulation Resistance 500M, No breakdown or flashover |
| Temperature Cycling | 5 cycles (-553 for 30min, 853 for 30min, with room temp transition) | Same as Humidity test (Contact Resistance 30m, Insulation Resistance 500M, No breakdown or flashover) |
| Salt Spray | Temperature: 353, Solution: 51%, Period: 8 hours (after plating) or 48 hours (before plating) | Appearance: No damage, Contact Resistance 30m |
| Solder Ability | Solder Temperature: 2455, Immersion period: 30.5S | Soldering Area: 90% |
| Resistance to Soldering Heat | Hand soldering: 3055, 30.5S; Wave soldering: 2305, 50.5S | Appearance: No damage |
2203111830_HCTL-HC-2510-2A_C2982031.pdf
Send RFQ
Stock:
MOQ:
