Connector Strip 2.54 Series Featuring HCTL HC XG 2 Times 10AW 05 for Electrical Connection Stability
Manufacturer:
HCTL
Description:
Connector IDC Header Through Hole, Right Angle 20 position 2.54mm
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Free Hanging, Panel Mount
Specifications
Row Spacing:
2.54mm
Operating Temperature:
-25℃~+85℃
Current Rating:
3A
Contact Plating:
金
Contact Material:
黄铜
Voltage Rating (Max):
250V
Number Of Positions Or Pins:
2x10P
Number Of PINs Per Row:
10
Number Of Rows:
2
Pitch:
2.54mm
Connector Type:
牛角扣
Mounting Type:
弯插
Mfr. Part #:
HC-XG-2*10AW-05
Package:
Through Hole,Right Angle,P=2.54mm
Model Number:
HC-XG-2*10AW-05
Introduction
Product Overview
This specification covers the 2.54 series connector strip, including product performance, test methods, and inspection requirements. It is designed for applications requiring reliable electrical connections.
Product Attributes
- Brand: HCT
- Origin: Shenzhen, China
- Material: Phosphor bronze, Brass, PBT
- Certifications: ROHS
Technical Specifications
| Item | Requirement | Test Mode |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating, oxides and not peeled. | General Principles |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 3. USE CONDITION | ||
| Ambient temperature Range | -25 85 | |
| Applicable Wire Sizes | AWG #2226 | |
| Applicable PC board thickness | 1.6mm | |
| 5. Material | ||
| Terminal Contact | Phosphor bronze (0.22mm thick) / Brass (0.64mm thick) | |
| Housing Plastic | PBT UL94V-0 | |
| Finish (Terminal) | Local gold plated: 3m / Half the gold plated 2u / Half the gold plated 3u | |
| Color (Housing) | Black / White | |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 3A AC/DC | |
| Withstand voltage | No breakdown or flashover | Apply 500V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | Initial value 20m | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7. Mechanical Performance | ||
| Single contact insertion force | 3.5N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Single contact Withdrawal force | 0.39N | The terminal and the hole seat at a react per minute to 253mm along the write direction are pulled out from the hole in the seat capacity |
| Terminal crimping Wire strength | 10N (AWG#22) / 10N (AWG#24) / 10N (AWG#26) | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit |
| Pin Retention Force | 50N (Pin) | |
| Seat pull-out force | 30N (AWG#22 wire) / 20N (AWG#24 wire) / 15N (AWG#26 wire) | |
| Vibration | Current Interruption: 1 sec Max / Contact Resistance 40m | Amplitude: 1.5mm p-p, Frequency: 10-55-10 Hz/minute, Period: 2 hours for each direction (X, Y, Z axis) |
| Durability | Contact Resistance 40m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test |
| 8. Endurance Characteristics | ||
| Thermal Aging | Appearance: No damage / Contact Resistance 40m | Temperature: 852, Period: 96 hours continuously |
| Temperature Rise | Connector combination measure the temperature rise of contact when the maximum rated current is passed | |
| Constant Humidity | Appearance: No damage / Contact Resistance 40m / Insulation Resistance 1000m | Relative humidity: 90-95% (RH), Period: 96 hours continuously, Temperature: 402 C |
| Temperature Cycling | Appearance: No damage / No breakdown or flashover | One cycle: -553C 30min, room temp 10-15min, then 853C 30min, room temp 10-15min. Total cycle: 5 cycles |
| Salt spray | Appearance: No damage / Contact Resistance 40m | Temperature: 353C, Concentration: 51%, Period: 24H |
| Solder ability | Soldering area: 90 % | Solder temperature: 2455C, Immersion period: 30.5S |
| Resistance to soldering heat (Wave soldering) | Soldering temperature: 2605C, Soldering time: 50.5S | |
| Resistance to soldering heat (Manual soldering) | Soldering pot: 3505C, Soldering time: 30.5S | |
2311081457_HCTL-HC-XG-2-10AW-05_C19189795.pdf
Send RFQ
Stock:
MOQ:
